| temperature_range | 55% | 55 | |
| power_supply_voltage | 50% | 50 | |
| accuracy_class | 49% | 49 | III, II, ['III', 'IIII'] |
| software_identification | 36% | 36 | Version number:V3.112, U2.04, 8.X.YY (8 is related to the legal metrological relevant software,and X and Y are numbers between0 to9 related to the non-legal metrological relevant software.) |
| scale_interval | 28% | 28 | |
| weighing_ranges | 28% | 28 | Single interval, ['Single interval', 'Multi-interval'], Single interval, Multi-interval, Multiple range |
| maximum_capacity | 26% | 26 | |
| power_supply_frequency | 22% | 22 | |
| application | 22% | 22 | Intended to be used for direct sales to the public, Intended to be used for weighing patients, weighing patients |
| weighing_range | 21% | 21 | |
| tare | 19% | 19 | |
| number_of_scale_intervals | 18% | 18 | |
| power_supply_type | 17% | 17 | AC, AC/DC adapter or battery, AC or DC (through battery pack) |
| max_partial_weighing_ranges | 17% | 17 | 2, 1 |
| minimum_input_voltage_per_verification_scale_interval | 12% | 12 | |
| fraction_of_maximum_permissible_error | 11% | 11 | 0.5, Pind=0.5, P_{i}=0.5 |
| load_cell_connection | 9% | 9 | 4-wire, 4 or 6-core with braided outer screen, flexiblePVC overall Jacket.0.5mm2per coreMaximum length(6-wire)=30m(60m/mm2), 6-wire (remote sensing) |
| minimum_load_cell_resistance | 8% | 8 | |
| maximum_load_cell_resistance | 8% | 8 | |
| measuring_range | 7% | 7 | |
| measuring_range_maximum_voltage | 6% | 6 | |
| max_verification_scale_intervals | 5% | 5 | 3000, 100000, 10000, 1000, ≤3000 or 2x3000 |
| load_cell_excitation_voltage | 5% | 5 | |
| minimum_load_cell_impedance | 5% | 5 | |
| maximum_load_cell_impedance | 5% | 5 | |
| max_scale_intervals_single_range | 5% | 5 | |
| max_scale_intervals_multi_interval | 5% | 5 | |
| fraction_of_the_maximum_permissible_error | 4% | 4 | 0.5, 0 |
| tare_balancing_range | 4% | 4 | Until 100% of Max, Until 100 % of Max, until 100% of Max |
| maximum_tare_effect | 4% | 4 | |
| maximum_input_impedance | 4% | 4 | |
| operational_temperature | 4% | 4 | min=-10, max=40 |
| max_weighing_ranges | 4% | 4 | 2 |
| minimum_signal_input_voltage | 4% | 4 | 0, min=0, max=None |
| load_cell_interface | 4% | 4 | 6-wire with sense technology, 6-wire(remote sensing), 6-wire with sense technology, may be configured as 4-wire |
| max_verification_scale_intervals_n | 3% | 3 | 3000, 100000, min=None, max=3000 |
| maximum_cable_length | 3% | 3 | |
| minimum_input_voltage_per_vsi | 3% | 3 | 1, 0.5, ['0.2μV', '0.52μV'] |
| initial_zero_setting_range | 3% | 3 | |
| minimum_capacity | 3% | 3 | |
| minimum_input_impedance | 3% | 3 | |
| actual_scale_interval | 3% | 3 | ['d', '10d', '20d', '50d', '100d'], 10d, e=d |
| maximum_partial_weighing_ranges | 3% | 3 | 2 |
| fraction_of_max_permissible_error | 3% | 3 | 0.5 |
| maximum_number_of_scale_intervals_multi_interval | 3% | 3 | |
| maximum_number_of_partial_weighing_ranges | 3% | 3 | 2 |
| max_scale_intervals_multi_range | 3% | 3 | |
| max_scale_intervals | 3% | 3 | 3000, min=None, max=3000 |
| configuration | 3% | 3 | Analog load cells, Digital load cells or weighing module |
| type | 2% | 2 | WX/WXS/CST/WTS/PC5/PC5S/PC5H/PC5SH/PC6/PC6S/PC6H/PC6SH, MZ3042 |
| semi_automatic_zero_setting_range | 2% | 2 | |
| zero_tracking_range | 2% | 2 | |
| number_of_intervals | 2% | 2 | min=None, max=3000, ≤10,000 or≤2x6000, ≤1000 or≤2x1000 |
| load_cell_impedance | 2% | 2 | |
| interface | 2% | 2 | Protective, according to paragraph5.3.6, Protective, according to paragraph 5.3.6 |
| power_supply_battery | 2% | 2 | |
| max_tare_effect | 2% | 2 | -Max, 20 × e_i |
| maximum_tare | 2% | 2 | -100% Max |
| maximum_preset_tare | 2% | 2 | -100% Max |
| minimum_input_voltage_per_scale_interval | 2% | 2 | |
| maximum_tare_value | 2% | 2 | |
| load_cell_cable_length | 2% | 2 | |
| max_scale_intervals_single | 2% | 2 | |
| fractional_factor_pi | 2% | 2 | 0.5 |
| applied_error_fraction_pi | 2% | 2 | 0.5 |
| tare_single_interval | 2% | 2 | |
| tare_multi_interval | 2% | 2 | -(Max1-e1), ≤ -Max1 |
| power_supply_voltage_dc | 2% | 2 | 13.8, 6 |
| min_input_voltage_per_verification_scale_interval | 2% | 2 | 1, 0.66 |
| min_load_cell_resistance | 2% | 2 | 87, 35 |
| max_load_cell_resistance | 2% | 2 | 1220, min=1050, max=1150 |
| software_scale_firmware_version | 2% | 2 | 5.103 |
| software_pos_checksum | 2% | 2 | 26141, 26141 |
| electromagnetic_environment_class | 2% | 2 | E2 |
| max_scale_intervals_multiple_range | 2% | 2 | 3000, min=None, max=3000 |
| max | 2% | 2 | |
| maximum_number_of_scale_intervals_one_weighing_range | 2% | 2 | min=None, max=6000 |
| maximum_number_of_digital_load_cells | 1% | 1 | 8 |
| power_supply_to_digital_load_cell | 1% | 1 | 9 |
| preset_tare_value | 1% | 1 | Until 100% of Max |
| fractional_error_pi | 1% | 1 | 0.5 |
| tare_range | 1% | 1 | -Max |
| fraction_max_permissible_error_pi | 1% | 1 | 0 |
| minimum_load_cell_input_impedance | 1% | 1 | 350 |
| software_version_format | 1% | 1 | v x.x |
| software_checksum | 1% | 1 | 41EC |
| software_separation | 1% | 1 | True |
| legal_software_update_method | 1% | 1 | calibration switch |
| application_software_version_format | 1% | 1 | nctssxx.aar |
| self_test_function | 1% | 1 | True |
| automatic_zero_setting_device_range | 1% | 1 | within 4% of Max |
| zero_indicating_device | 1% | 1 | True |
| stable_indicating_device | 1% | 1 | True |
| printing_device | 1% | 1 | True |
| extended_resolution | 1% | 1 | True |
| interfaces | 1% | 1 | ['CAN/RS485', 'Digital input (up to 4)', 'Digital output (up to 4)', 'CAN bus', 'RS232', 'Ethernet (optional)'] |
| minimum_input_voltage | 1% | 1 | 0.5μV per VSI(version01.xx)0.4μV per VSI(version02.xx and3.xx) |
| load_cell_connecting_system | 1% | 1 | 6 wire system, screened |
| module_fractional_factor | 1% | 1 | 0.5for the indicator |
| connected_load_cells | 1% | 1 | Shall comply withR60 |
| subtractive_tare | 1% | 1 | ≤-Max |
| supply_frequency | 1% | 1 | min=50, max=60 |
| output_voltage | 1% | 1 | 12 |
| weighing_range_type | 1% | 1 | Single-interval or multi-interval (up to 2 intervals) |
| verification_scale_interval_class_iii | 1% | 1 | min=20, max=None |
| verification_scale_interval_class_iiii | 1% | 1 | min=10, max=None |
| minimum_verification_scale_interval_class_iii | 1% | 1 | min=0.1, max=None |
| minimum_verification_scale_interval_class_iiii | 1% | 1 | min=5, max=None |
| max_verification_scale_intervals_class_iii | 1% | 1 | min=None, max=10000 |
| max_verification_scale_intervals_class_iiii | 1% | 1 | min=None, max=1000 |
| ewi_module_accuracy_class | 1% | 1 | III or IIII |
| ewi_module_weighing_range_type | 1% | 1 | Single-interval or multi-interval |
| ewi_module_max_verification_scale_intervals_class_iii | 1% | 1 | min=None, max=10000 |
| ewi_module_max_verification_scale_intervals_class_iiii | 1% | 1 | min=None, max=1000 |
| ewi_module_max_tare_effect | 1% | 1 | -Max |
| ewi_module_fractional_factor | 1% | 1 | 0.5 |
| ewi_module_min_input_voltage_per_vsi | 1% | 1 | 0.3 |
| ewi_module_excitation_voltage | 1% | 1 | 5 |
| ewi_module_circuit_for_remote_sense | 1% | 1 | Present using 6-wire connection |
| ewi_module_min_input_impedance | 1% | 1 | 58 |
| ewi_module_max_input_impedance | 1% | 1 | 1200 |
| ewi_module_mains_power_supply | 1% | 1 | 7 VDC |
| ewi_module_operational_temperature | 1% | 1 | min=-10, max=40 |
| ewi_module_max_cable_length | 1% | 1 | 1435 m/mm² |
| ewi_module_software_version | 1% | 1 | E1.xxxxx |
| power_supply_current | 1% | 1 | 1.25 |
| power_supply_dc | 1% | 1 | 12-36V DC via mains adaptor or external battery pack |
| power_supply_ac | 1% | 1 | 110-240V AC |
| verification_interval | 1% | 1 | 2 |
| max_scale_intervals_dual | 1% | 1 | 3000 |
| maximum_number_of_verification_scale_intervals_n | 1% | 1 | ['10000 for Class III, 1000 for Class IIII', '7500 for Class III, 1000 for Class IIII'] |
| maximum_capacity_of_interval_or_range_maxi | 1% | 1 | ['ni×ei', 'ni×ei'] |
| verification_scale_interval_ei | 1% | 1 | ['ei=Maxi/ni', 'ei=Maxi/ni'] |
| connecting_cable_to_load_cells | 1% | 1 | 4-wire or 6-wire system |
| supply_voltage | 1% | 1 | 12-24VDC,or230VAC |
| shunt_diode_safety_barrier | 1% | 1 | ['N/A', 'MTL7761ac,MTL7766Pac,or similar'] |
| signal_voltage_per_verification_scale_interval | 1% | 1 | min=0.83, max=None |
| max_scale_intervals_n | 1% | 1 | 3200 |
| software_version_number | 1% | 1 | 9351 |
| software_identification_weigh_bridge | 1% | 1 | Version number:1.xx(wherexxrepresentsmetrologicalnotrelevantchanges) |
| maximum_number_of_verification_scale_intervals | 1% | 1 | 3000 |
| maximum_value_of_the_cable_length_per_cross_wire_section_between_the_indicator_and_the_load_cells | 1% | 1 | The load cells are connected directly without junction box |
| power_supply_voltage_ac_dc_adapter | 1% | 1 | 7.5 |
| power_supply_voltage_battery | 1% | 1 | 6 |
| power_supply_voltage_alt | 1% | 1 | min=200, max=240 |
| cable_length_connection | 1% | 1 | The load cells are connected directly without junction box |
| verification_scale_interval_single_interval | 1% | 1 | 2 |
| verification_scale_interval_multi_interval | 1% | 1 | 5 |
| maximum_number_of_scale_intervals_single_interval | 1% | 1 | 3000 |
| maximum_number_of_weighing_ranges | 1% | 1 | 2 |
| legally_relevant_software_version | 1% | 1 | 1.01 |
| max_scale_intervals_multi | 1% | 1 | 6000 |
| power_supply_frequency_ac | 1% | 1 | min=50, max=60 |
| power_supply_type_ac | 1% | 1 | AC |
| power_supply_voltage_dc_adapter | 1% | 1 | min=9, max=28 |
| power_supply_voltage_dc_battery | 1% | 1 | 12 |
| power_supply_voltage_dc_ics466x | 1% | 1 | min=5.3, max=12.6 |
| max_load_platforms_ics6x9_1_ics4x5_1_ics466x | 1% | 1 | 2 |
| max_load_platforms_ics4x9_1_ics426x | 1% | 1 | 1 |
| max_load_platforms_ics6x5_1 | 1% | 1 | 4 |
| software_version_jposdibal | 1% | 1 | 1.X.XX(x=0...9) |
| pc_software_checksum | 1% | 1 | 8A7DED6411F674524CC47FB81 |
| software_version_wldibal | 1% | 1 | 2.0.3 |
| weighing_cpu_checksum | 1% | 1 | 110C |
| software_legal_cert_version | 1% | 1 | 2.102 |
| humidity_class | 1% | 1 | non-condensing |
| intended_location | 1% | 1 | closed |
| dc_power_supply_voltage | 1% | 1 | min=9, max=30 |
| dc_power_supply_type | 1% | 1 | DC |
| software_version | 1% | 1 | V1.xx or V2.xx (xx=00...99 for the legally non-relevant software) |
| power_supply_adapter | 1% | 1 | 100-240VAC/DC |
| power_supply_battery_options | 1% | 1 | ['6V lead acid battery', '7.2V NiMH battery'] |
| maximum_cable_length_per_cross_wire_section | 1% | 1 | 2997.9 |
| firmware_identification | 1% | 1 | 2.0.3 |
| max_number_of_partial_weighing_ranges | 1% | 1 | |
| maximum_capacity_g | 1% | 1 | min=122, max=3200 |
| maximum_capacity_ct | 1% | 1 | min=610, max=16000 |
| verification_scale_interval_g | 1% | 1 | min=0.01, max=None |
| verification_scale_interval_ct | 1% | 1 | min=0.1, max=None |
| maximum_inclination_x_axis | 1% | 1 | 5 |
| maximum_inclination_y_axis | 1% | 1 | 3 |
| software_legal_certification_version | 1% | 1 | 2.102 |
| n_le | 1% | 1 | 3000 |
| number_of_verification_scale_intervals_n | 1% | 1 | min=None, max=3000 |
| special_temperature_limits | 1% | 1 | min=0, max=40 |
| d | 1% | 1 | min=0.1, max=None |
| n | 1% | 1 | min=None, max=10100 |
| tare_weighing_range | 1% | 1 | Until 100% of Max |
| ingress_protection_rating | 1% | 1 | IP52 |
| display | 1% | 1 | LCD |
| storage_temperature | 1% | 1 | min=-20, max=60 |
| accuracy_class_oiml_r76 | 1% | 1 | III |
| the_applied_error_fraction_pi | 1% | 1 | 0.5 |
| weighing_software_version | 1% | 1 | O.1.yy |
| application_software_version | 1% | 1 | A.x.yy |
| operating_system | 1% | 1 | Embedded |
| primary_indication_unit | 1% | 1 | kg |
| weighing_range_configuration | 1% | 1 | Single or dual range |
| actual_scale_interval_d | 1% | 1 | min=0.1, max=None |
| maximum_number_of_verification_scale_intervals_per_weighing_rangen | 1% | 1 | min=None, max=3000 |
| maximum_number_of_actual_scale_interval | 1% | 1 | min=None, max=10000 |
| maximum_subtractive_tare_effect | 1% | 1 | -Max |
| minimum_signal_voltage_per_verification_scale_interval_muv_over_e | 1% | 1 | 0.5 |
| load_cell_excitation_voltage_v | 1% | 1 | 3.3 |
| load_cell_excitation_waveform_v | 1% | 1 | DC |
| minimal_load_cell_impedance_ohm | 1% | 1 | 87 |
| maximal_load_cell_impedance_ohm | 1% | 1 | 1200 |
| maximum_value_of_the_cable_length_per_cross_wire_section_between_the_indicator_and_the_junction_box_or_load_cells | 1% | 1 | 50m/mm2 |
| high_resolution_mode | 1% | 1 | 10x |
| internal_resolution | 1% | 1 | >16,000,000 counts |
| minimum_signal_voltage_dead_load | 1% | 1 | 1 |
| analog_range | 1% | 1 | min=1, max=40 |
| remote_sense_circuit | 1% | 1 | Active |
| maximum_load_cell_cable_length | 1% | 1 | 46 |
| mains_power_supply_voltage | 1% | 1 | min=100, max=240 |
| mains_power_supply_frequency | 1% | 1 | min=50, max=60 |
| minimum_input_voltage_per_verification_interval | 1% | 1 | 0.66 |
| max_cable_length_per_cross_section | 1% | 1 | Length406m/mm2 |
| max_scale_intervals_single_interval | 1% | 1 | min=None, max=3000 |
| max_number_of_load_platforms | 1% | 1 | 2 |
| max_scale_intervals_one_weighing_range | 1% | 1 | min=None, max=3000 |
| software_identification_scale_application | 1% | 1 | SA1.y.z(y:0-99,z:0-9999) |
| software_identification_viewer_application | 1% | 1 | VA1.y.z(y:0-99,z:0-9999) |
| cable_length_note | 1% | 1 | In case sense technology is not used the load cells are connected directly without junction box or extension cable |
| maximum_value_of_the_cable_length_per_cross_wire_section | 1% | 1 | 1956 |
