R85/2008-A-NL1-25.01 Rev. 0

OIML Member State The Netherlands

Number R85/2008-A-NL1-25.01 revision 0 Project number 3866763 Page 1 of 2

NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Manufacturer Joyo M&C Technology Co., Ltd.

Room 008,1F (2-3), Building 4, Ganluyuan

Chaoyang District, Beijing

China

Identification of the certified type

An automatic level gauge (servo principle) with temperature and density displacer sensor Manufacturer's mark: Joyo M&C Technology Co., Ltd. Type: TM-80N

Characteristics See following page(s)

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 85-1&2:2008 "Automatic level gauges for measuring the level of liquid in stationary storage tanks"

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 13 May 2025

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

Number R85/2008-A-NL1-25.01 revision 0

Project number 3866763

Page 2 of 2

The conformity was established by the results of tests and examinations provided in the associated report(s):

No. NMi-3866763-01 dated 13 May 2025 that includes 25 pages.

Characteristics of the measuring instrument

In Table 1 the general characteristics of the measuring instrument are presented. The construction of the measuring instrument is recorded in the Documentation folder no. R85-2008-A-NL1-25.01-1.

Certificate history: