R85/2008-A-CZ1-23.01 Rev. 2
| OIML Certification System | CMI | V3112 | |
| OIML Member State Czech Republic | OIML Certificate No. R85/2008-A-CZ1-23.01 Revision 2 | ||
| OIML CERTIFICATE ISSUED UNDER SCHEME A | |||
| OIML Issuing Authority Name: Czech Metrology Institute Address: Okružní 31 638 00 Brno Czech Republic Person responsible: Jan Kalandra | |||
| Applicant Name: DOVER FUELING SOLUTIONS ITALIA SRL Address: Via Privata G. Natta 6 20823 Lentate Sul Seveso (MB) Italy | |||
| Manufacturer Name: DOVER FUELING SOLUTIONS ITALIA SRL Address: Via Privata G. Natta 6 20823 Lentate Sul Seveso (MB) Italy | |||
| Identification of the certified type (the detailed characteristics will be defined in the additional pages) Magnetostrictive level gauge type: DMP-IS-485 | |||
| This OIML Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML type evaluation report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML): OIML R 85, Edition: 2008 | |||
| Revision No. | Date | Description of the modification |
| 27 February 2023 | Issuing certificate | |
| Revision 1 | 18 March 2024 | Transfer of ownership to new applicant |
| Revision 2 | 24 April 2024 | Change in number of certificate |
| The OIML Issuing Authority RNDr. Pavel Klenovský Head of Certification Body Date:24 April 2024 | ||
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full.
Measuring system description
The level sensor DMP-IS-485 is done by a shaft or flexible corrugated hose in stainless steel, by a head in stainless steel and composite caps IP68, a circular connection 7/8" or cablegland and fuel resistant cable, floats in Stainless Steel, or NBR, or in special expanded cell close PVC.
The level sensor can be used with consoles MAGLINK-LX as indicating unit.
Characteristics
| Probes | Type | DMP-IS-485 (option:1-wire) |
| Measuring principle | Magnetostrictive | |
| Probe's body material | Stainless steel | |
| Floats | Stainless steel,NBR or expanded PVC | |
| Length | up to 10000mm | |
| Accuracy | better than±1mm | |
| Temperature | -25℃ to+55℃ |