R85/2008-B-CZ1-20.01
| OIML Certification System | CMI |
| OIML Member State Czech Republic | OIML Certificate No. R85/2008-B-CZ1-2020.01 |
| OIML CERTIFICATE ISSUED UNDER SCHEME B | |
| OIML Issuing Authority Name: Czech Metrology Institute Address: Okružní 31 638 00 Brno Czech Republic Person responsible: Jan Kalandra | |
| Applicant Name: Start Italiana SRL Address: Via Pola 6 Bovisio Masciago (MB) Italy | |
| Manufacturer Name: Start Italiana SRL Address: Via Pola 6 Bovisio Masciago (MB) Italy | |
| Identification of the certified type (the detailed characteristics will be defined in the additional pages) Magnetostrictive level gauge type: DMP-IS-485 | |
| This OIML Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML type evaluation report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML): OIML R 85, Edition: 2008 | |
| This OIML Certificate relates only to metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML Recommendation identified above. This OIML Certificate does not bestow any form of legal international approval. | ||
| The conformity was established by the results of tests and examinations provided in the associated OIML type evaluation report and test reports: No.015_19 that includes 1 page, No.6015-PT-P5002-20 that includes 29 pages,No.6015-PT-P3016-14 that includes 30 pages and No.6015-PT-P3024-12 that includes 34 pages. | ||
| The technical documentation relating to the identified type is contained in documentation file: 015_19 dated 11 October 2019. OIML Certificate History | ||
| Revision No. | Date | Description of the modification |
| The OIML Issuing Authority RNDr.Pavel Klenovský Director General Date:29 June 2020 | ||
| Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full. | ||
Measuring system description
The level sensor DMP-IS-485 is done by a shaft in stainless steel, by a head in stainless steel and composite caps IP68, a circular connection 7/8" or cablegland and fuel resistant cable, floats in Stainless Steel, or NBR, or in special expanded cell close PVC.
The level sensor can be used with consoles MAGLINK-LX, SiteSentinel Nano and SiteSentinel Integra 100/500 as indicating unit.
Characteristics
| Probes | Type | DMP-IS-485(option:1-wire) |
| Measuring principle | Magnetostrictive | |
| Probe's body material | Stainless steel | |
| Floats | Stainless steel,NBR or expanded PVC | |
| Length | up to 7000mm | |
| Accuracy | better than±1mm | |
| Temperature | -25℃to+55℃ |
Bosky metrologioky institut