R85/2008-B-CZ1-18.01
| OIML Certification System | CMI |
| OIML Member State Czech Republic | OIML Certificate No. R85/2008-B-CZ1-2018.01 |
| OIML CERTIFICATE ISSUED UNDER SCHEME B | |
| OIML Issuing Authority Name: Czech Metrology Institute Address: Okružní 31 638 00 Brno Czech Republic Person responsible: Jan Kalandra | |
| Applicant Name: FAFNIR GmbH Address: Schnackenburgallee 149 c 22525 Hamburg Germany | |
| Manufacturer Name: FAFNIR GmbH Address: Schnackenburgallee 149 c 22525 Hamburg Germany | |
| Identification of the certified type (the detailed characteristics will be defined in the additional pages) Magnetostrictive level gauge type: VISY-Stick; VISY-Stick Advanced; VISY-Stick Flex | |
| This OIML Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML type evaluation report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML): OIML R 85, Edition: 2008 | |
Measuring system description
The level sensor VISY-Stick is done by a shaft in stainless steel (diameter 12 mm), by a head in stainless steel IP68, M12 connector and two floats in Stainless Steel.
The level sensor VISY-Stick Advanced is done by a shaft in stainless steel (diameter 12 mm), by a head in stainless steel IP68, M12 connector and two floats in Stainless Steel.
The level sensor VISY-Stick Flex is done by a shaft and corrugated hose in stainless steel (diameter 12 mm), by a head in stainless steel IP68, M12 connector, two floats in Stainless Steel, weight and magnetic base at the lower end of the probe.
Characteristics
| Probes | Type | VISY-Stick |
| Measuring principle | Magnetostrictive | |
| Probe's body material | Stainless steel | |
| Floats | Stainless steel | |
| Length | up to 6000 mm | |
| Accuracy | better than $\pm1$ mm | |
| Temperature | -25℃ to +55℃ | |
| Type | VISY-Stick Advanced | |
| Measuring principle | Magnetostrictive | |
| Probe's body material | Stainless steel | |
| Floats | Stainless steel | |
| Length | up to 6000 mm | |
| Accuracy | better than $\pm1$ mm | |
| Temperature | -25℃ to +55℃ | |
| Type | VISY-Stick Flex | |
| Measuring principle | Magnetostrictive | |
| Probe's body material | Stainless steel | |
| Floats | Stainless steel | |
| Length | up to 22500 mm | |
| Accuracy | better than $\pm1$ mm | |
| Temperature | -25℃ to +55℃ |
| This OIML Certificate relates only to metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML Recommendation identified above. This OIML Certificate does not bestow any form of legal international approval. | ||
| The conformity was established by the results of tests and examinations provided in the associated OIML type evaluation report: No.6015-PT-P3021-12 that includes 29 pages,No.6015-PT-P3022-12 that includes 29 pages,No.6015-PT-P3023-16 that includes 2 pages and6015-PT-P5004-18 that includes 2 pages. | ||
| The technical documentation relating to the identified type is contained in documentation file: No.0511-UL-V027-18 dated 19.September 2018. | ||
| OIML Certificate History | ||
| Revision No. | Date | Description of the modification |
| The OIML Issuing Authority RNDr.Pavel Klenovský Director General Date:20.December2018 | ||
| Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued,partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full. | ||