R76/2006-A-NL1-25.22 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-25.22 revision 0 Project number 2597918 Page 1 of 3
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
SENSOCAR S.A.U.
Pol. Ind. Can Parellada -c/ Géminis, 77
08228 Terrassa - Barcelona
Spain
Identification of the certified type
An Indicator Type
: KRONOS
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class or
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 7 November 2025
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-25.22 revision 0
Project number 2597918
Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated reports:
No. NMi-2597918-01 dated 7 November 2025 that includes 40 pages;
No. NMi-2597918-02 dated 7 November 2025 that includes 16 pages.
Characteristics of the indicator:
| Accuracy class | III or III |
| Weighing range(s) | Single interval Multi-interval |
| Maximum number of scale intervals (one weighing range) | n≤6000 |
| Maximum number of scale intervals (multi-interval) | n≤3000 (per partial weighing range) |
| Maximum number of partial weighing ranges | 2 |
| Load cell excitation voltage | 5V DC |
| Minimum signal input voltage | Umin=0mV |
| Minimum input voltage per verification scale interval | 0.5μV |
| Minimum load cell resistance | 40Ω |
| Maximum load cell resistance | 1050Ω |
| Fraction of the maximum permissible error | 0.5 |
| Load cell interface | 6-wire with sense technology |
| Maximum value of the cable length per cross wire section between the indicator and the junction box or load cells | 1956m/mm2 |
| Temperature range | -10℃/+40℃ |
| Electromagnetic environment class | E2 |
| Power supply voltage | 8-28V DC |
| Software identification | YYXXX-XXXXY-001,where Y=A...Z and X=0...9 |
Software:
The identification number can be checked in the "VERSIO" option, which is found in the "DISPLAY" submenu of the settings menu;
Alternatively, the identification number will be displayed at start-up;
The indicator has embedded software.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-25.22 revision 0 Project number 2597918 Page 3 of 3
Revision History
| Revision | Date | Change(s) |
| 0 | 2025-11-07 | Initial issue. |