R76/2006-A-NL1-24.13 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-24.13 revision 0 Project number 3788297 Page 1 of 2
Issuing authority
NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Manufacturer
Mettler-Toledo GmbH
Im Langacher 44
8606 Greifensee
Switzerland
Identification of the certified type
A Non-automatic weighing instrument Type : FreshStar...
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 28 June 2024
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-24.13 revision 0
Project number 3788297
Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated reports:
No. NMi-3788297-01 dated 28 June 2024 that includes 25 pages;
No. NMi-3788297-02 dated 28 June 2024 that includes 21 pages.
Characteristics of the non-automatic weighing instrument:
| Accuracy class | $\textcircled{111}$ | |
| Maximum capacity | 3kg≤Max≤30kg | |
| Verification scale interval | e≥1g | |
| Weighing ranges | Single interval Multi-interval | |
| Maximum number of scale intervals (one weighing range) | n≤3000 | |
| Maximum number of scale intervals (multi-interval) | n≤3000 (per partial weighing range) | |
| Maximum number of partial weighing ranges | 2 | |
| Tare | T≤-Max | |
| Temperature range | -10℃/+40℃ | |
| Power supply voltage | 100-240V AC 50/60Hz | |
| Application | Intended to be used for direct sales to the public | |
| Software identification | Scale application | SA1.y.z(y:0-99,z:0-9999) |
| Viewer application | VA1.y.z(y:0-99,z:0-9999) | |
The procedure to display/print the software identification and to recall the event logger is as follows: Press 'Menu' -> Enter password 246813-> 'Configuration' -> 'System' -> 'Printout System Info'.
This will result in a printout with all the information related to the instrument and software; Software identification for scale application and viewer application are also shown at start-up.
Revision History
| Revision | Date | Change(s) |
| 0 | 2024-06-28 | Initial issue. |