R76/2006-A-NL1-21.23 Rev. 4
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-21.23 revision 4 Project number 3891265 Page 1 of 3
Issuing authority
NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Bizerba SE & Co. KG Wilhelm-Kraut-Str. 65 72336 Balingen Germany
Identification of the certified type
A weighing module
Type : QBase
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class or
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 2 January 2025
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-21.23 revision 4
Project number 3891265
Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated reports:
No. NMi-2477454-02 dated 15 April 2021 that includes 18 pages;
No. NMi-2477454-01 revision 1 dated 15 September 2023 that includes 51 pages;
No. NMi-2529842-01 dated 15 April 2021 that includes 17 pages.
No. NMi-3532583-02 dated 14 April 2023 that includes 21 pages;
No. NMi-3532583-03 dated 14 April 2023 that includes 21 pages;
No. NMi-3680753-01 dated 21 December 2023 that includes 36 pages;
No. NMi-3680753-02 dated 21 December 2023 that includes 17 pages;
No. NMi-3741110-01 dated 12 March 2024 that includes 22 pages;
No. NMi-3741825-01 dated 29 August 2024 that includes 15 pages.
Characteristics of the weighing module:
| Accuracy class | or | |
| Maximum capacity | Max≤30kg | |
| Verification scale interval | e≥1g | |
| Weighing range(s) | Single interval Multi-interval | |
| Maximum number of scale intervals (one weighing range) | n≤6000 | |
| Maximum number of scale intervals (multi-interval) | n≤3000 (per partial weighing range) | |
| Maximum number of partial weighing ranges | 2 | |
| Temperature range | -10℃/+40℃ | |
| Power supply voltage | 4,4-5,25VDC(throughUSB)(variant without CPU board) 12VDC(variant with CPU board) | |
| A/D Board software identification | Version number (legally relevant)1) | Software ID |
| 010 | 6153 | |
| 011 | 5232 | |
| 030 | 1446 | |
| 014 | 4751 | |
| CPU software identification(QBaseC2) | 001 | 8324 |
- The identification of the non-legally relevant software version can optionally be added to the identification of the legally relevant software version, separated by "::" (example: "010::x.y" or "011::x.y").
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-21.23 revision 4 Project number 3891265 Page 3 of 3
Revision History
This revision replaces the previous versions
| Revision | Date | Change(s) |
| 0 | 2021-04-15 | Initial issue. |
| 1 | 2023-09-18 | Replace type evaluation report NMi-2477454-01 with NMi-2477454-01 revision 1. |
| 2 | 2023-12-21 | Adding test reports concerning tested additional CPU board and tilt compensation function. |
| 3 | 2024-03-12 | Adding test report concerning tested additional I/O board and power adapter. |
| 4 | 2025-01-02 | Addition of an alternative A/D board and a new software version. |