R76/2006-A-NL1-21.01 Rev. 1
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-21.01 revision 1 Project number 3633002 Page 1 of 3
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Shanghai Teraoka Electronic Co., Ltd.
No. 6058 of Nan Ting Road
Ting Lin Town, Jin Shan District
Shanghai
China
Identification of the certified type
An Indicator Type
: DIX-3000 DIX-3000SS
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class or
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Reports is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 14 March 2023
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-21.01 revision 1
Project number 3633002
The conformity was established by the results of tests and examinations provided in the associated OIML Type Evaluation Reports:
Page 2 of 3
No. NMi-2434284-01 dated 22 October 2020 that includes 55 pages;
No. NMi-2551360-01 dated 11 January 2021 that includes 15 pages;
No. NMi-3633002-01 dated 14 March 2023 that includes 18 pages.
Characteristics of the indicator:
| Configuration | Analog load cells | ||
| Accuracy class | or | ||
| Weighing range(s) | Single interval Multi-interval | ||
| Maximum number of scale intervals (one weighing range) | n≤7500 | ||
| Maximum number of scale intervals (multi-interval) | n≤7500 (per partial weighing range) | ||
| Maximum number of partial weighing ranges | 2 | ||
| Tare | T≤-Max1+e1for multi-interval instruments | ||
| Load cell excitation voltage | 5VDC | ||
| Minimum signal input voltage | Umin=0mV | ||
| Minimum input voltage per verification scale interval | 0.66μV | ||
| Minimum load cell resistance | 85Ω | ||
| Maximum load cell resistance | 3300Ω | ||
| Fraction of the maximum permissible error | 0.5 | ||
| Load cell interface | 6-wire(remote sensing) | ||
| Maximum value of the cable length per cross wire section between the indicator and the junction box or load cells | Length406m/mm2 In case4-wire connection is used the load cells are connected directly without junction box | ||
| Temperature range | -10℃/+40℃ | ||
| Power supply voltage | 12VDC supplied by100-240VAC50/60Hz AC/DC adapter, 7,4Vinternal battery | ||
| Software identification | Filename | Version | Checksum |
| STE77 software | libwm.so | 1.1 | 0142994b15a6d3a0832b87f19ca29d9b |
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-21.01 revision 1
Project number 3633002
Page 3 of 3
Revision History
This revision replaces the previous version.
| Revision | Date | Change(s) |
| 0 | 2021-01-12 | Initial issue |
| 1 | 2023-03-14 | Addition of alternative AC/DC switch power adapter |