R76/2006-A-CH1-19.02 Rev. 6
Member State Switzerland
OIML Certificate No. No R076/2006-A-CH1-2019.02 Rev.6
OIML-CS CERTIFICATE ISSUED UNDER SCHEME A
Issuing authority
Name
Federal Institute of Metrology METAS
Conformity Evaluation Body METAS-Cert
Address
Lindenweg 50, 3003 Bern-Wabern, Switzerland
Person responsible
Gulian Couvreur, Head of METAS-Cert
Applicant
Name
Address
Sartorius Lab Instruments GmbH & Co. KG Otto-Brenner-Strasse 20, 37079 Göttingen, Germany The manufacturer of the certified pattern is the applicant.
Manufacturer
Identification of the certified type
Precision balances BC-E and BC-A Line
Type
BC-EI, BC-EJ, BC-AI, BC-AJ
This Certificate attests the conformity of the above identified type (represented by the sample or samples identified in the associated test report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 76-1, edition 2006
for accuracy class
This Certificate relates only to the metrological and technical characteristics of the type of instrument covered by the relevant OIML Recommendation identified above.
This Certificate does not bestow any form of legal international approval.
The present revision of this certificate is the only valid and replaces all previous revisions. This document is only valid and reviewable in its electronic form. Please observe the information given on www.metas.ch/ecert
Metrological characteristics
| Type | BC-EI, BC-AI | BC-EJ, BC-AJ |
| Accuracy Class | II | |
| Max | 5000g...8200g | 5000g...8200g |
| e | 1g | 1g |
| d | 0.1g-1g | 0.1g-1g |
| n | ≤8200 | ≤8200 |
| Tare-balancing range | until100% ofMax | |
| Temperature range | +10℃/+30℃ | |
| Nominal capacity of the load receptor | 9840g | 9840g |
| Initial zero setting+dead load1) | ≤4840g | ≤4840g |
| Maximum weighing pan size | 180mmx180mm | Ø180mm |
The conformity was established by the results of tests and examinations provided in the associated OIML type evaluation reports:
| No. | Date | Including pages |
| 6030-1190-06 | 2024-10-17 | 12 |
The technical documentation relating to the identified type is contained in documentation file:
Including pages
R076_2006-A-CH1-2019.02_Rev_06_LERD_V01
OIML Certificate History:
| Revision No. | Date | Description of the modification |
| 00 | 2019-09-24 | First issue |
| 01 | 2020-09-21 | Extension with the types BC-AI, BC-AJ |
| 02 | 2020-11-03 | Editorial changes |
| 03 | 2021-04-15 | Rebranding, change in design |
| 04 | 2021-08-12 | Version of software |
| 05 | 2022-06-16 | Version of software added, reinforcement of power connector(only in documentation) |
| 06 | 2024-10-17 | Change of the socket for power supply from SMD(Surface Mounted Device) to THT(Through Hole Technology).Therefore, modification of the mainboard has been conducted. |
The OIML Issuing Authority CH1
3003 Bern-Wabern, 2024-10-17
Approved by
Gulian Couvreur, Head of sector METAS-Cert
Important note:
Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full