R76/2006-A-NL1-20.53

OIML Certificate

OIML Member State The Netherlands

Number R76/2006-A-NL1-20.53 Project number 2315156 Page 1 of 2

Issuing authority

NMi Certin B.V.

Person responsible: M. Boudewijns

Applicant and Manufacturer

Mettler Toledo GmbH

Im Langacher 44

8606 Greifensee

Switzerland

Identification of the certified type

A Non-automatic weighing instrument Type : TLF820

Characteristics

See next page

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

OIML R 76 - Edition 2006 for accuracy class or

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above identified. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 12 October 2020

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

Number R76/2006-A-NL1-20.53 Project number 2315156 Page 2 of 2

The conformity was established by the results of tests and examinations provided in the associated OIML Reports:

No. NMi-13200101-01 dated 22 April 2013 that includes 49 pages;

No. NMi-13200101-02 dated 22 April 2013 that includes 13 pages;
For the indicator model IND236-TLF:
No. NMi-14200515-01 dated 28 November 2014 that includes 12 pages;
No. NMi-SO15202366-01 dated 26 February 2016 that includes 8 pages.
No. NMi-2315156-01 dated 8 October 2020 that includes 28 pages.
For the complete non-automatic weighing instrument:
No. NIM-LSmc-1503 dated 18 March 2015 that includes 26 pages. $ ^{1)} $

The model VFS120 uses the same weighing construction as the TLF820.

Characteristics of the non-automatic weighing instrument:

Accuracy class		or
Maximum capacity		1000kg≤Max≤5000kg
Verification scale interval		e≥1kg
Weighing range		Single interval
Maximum number of scale intervals		n≤number of scale intervals in the certificates involved
Maximum inclination		x-axis2)	5,00°
		y-axis2)	3,00°
Temperature range		-10℃/+40℃
Power supply voltage		12-36VDCby road vehicle battery
Application		Intended to be built on a forklift truck
Software identification		Version	Checksum
	Indicator IND236-TLF	1.xx.xxxxx(x=0...9)	-
	Primary display OctoCSM3)	1.0.x.x	0x70b681a3
		1.1.x.x	0x8d6aeabc
	Data Storage Device OctoAMS3)	1.0.x.x	0x3f8d71b0
		1.1.x.x	0x2de38b57

Remark:

The indicator IND236-TLF is placed sideways on the forklift. This means the inclination in the x-direction on the IND236-TLF means an inclination in the y-direction on the forklift.
Only applicable when the primary indications are provided by the external display OctoCSM.

When the primary indications are provided by the indicator IND236-TLF, the software identification number will be displayed at start-up.

When the primary indications are provided by the primary display OctoCSM, the software identification of the indicator (IND236-TLF) and of the OctoCSM software can be displayed by the OctoCSM software on the SmartPC terminal after pressing the 'ABOUT' button.