R76/2006-A-NL1-20.44 Rev. 1
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-20.44 revision 1
Project number 2633662
Page 1 of 3
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Shanghai Teraoka Electronics Co., Ltd.
No.6058 of Nan Ting Road
Ting Ling Town, Jin Shan District
Shanghai 201505
China
Identification of the certified type
A Weighing module Type
: AD2000, RM-5800LL B, RM-5800NLL
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 76 - Edition 2006 for accuracy class
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 15 February 2022
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-20.44 revision 1
Project number 2633662
Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated OIML Reports:
No. NMi-14200679-02 dated 15 February 2015 that includes 28 pages;
No. NMi-14200679-01 dated 15 February 2015 that includes 43 pages;
No. NMi-15200365-01 dated 12 June 2015 that includes 15 pages;
No. NMi-2353595-01 dated 8 May 2019 that includes 13 pages;
No. NMi-2391421-01 dated 4 September 2019 that includes 14 pages;
No. NMi-2433988-01 dated 10 March 2020 that includes 42 pages;
No. NMi-2441754-01 dated 10 March 2020 that includes 26 pages.
No. NMi-2488135-01 dated 3 August 2020 that includes 16 pages;
No. NMi-2488135-02 dated 3 August 2020 that includes 16 pages;
No. NMi-2633662-01 dated 9 February 2022 that includes 45 pages.
Characteristics of the weighing module:
| Load cell used | L6D | P, PS, K | only P and PS |
| Configuration | Weighing module | ||
| Accuracy class | III | ||
| Maximum capacity | 3kg≤Max≤30kg | 3kg≤Max≤37,5kg | |
| Verification scale interval | e≥1g | e≥5g | |
| Weighing range(s) | Single intervalMulti-interval | Single interval | |
| Maximum number of scale intervals(one weighing range) | n≤6000(withSTB-2236A/Dboard) | n≤6000(withSTB-2236,STB-2255orSTB-2255-xxA/Dboard) | n≤7500(withSTB-2255orSTB-2255-xxA/Dboard) |
| Maximum number of scale intervals(multi-interval) | n≤3000(per partial weighing range) | - | |
| Maximum number of partial weighing ranges | 2 | - | |
| Fraction of the maximum permissible error | 1 | ||
| Tare | T≤-50% for instruments with one weighing rangeT≤-Max1for multi-interval instruments | ||
| Temperature range | -10℃/+40℃ | ||
| Power supply voltage | For typeAD2000:12VDC viaRS232or5VDC viaUSBFor other types:100-240VAC50/60Hz | For typeAD2000:5VDC viaUSB | |
| Software identification | Version number:1.x.x(x=0...9) | ||
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-20.44 revision 1
Project number 2633662
Page 3 of 3
Revision History
This revision replaces the previous version(s).
| Revision | Date | Change(s) |
| Initial | 2020-08-03 | - |
| 1 | 2022-02-15 | Added new mainboard, power supply and L6D load cell |