R76/2006-A-NL1-20.35 Rev. 1
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-20.35 Revision 1
Project number 2590306
Page 1 of 2
Issuing authority NMi Certin B.V. Person responsible: M. Boudewijns
Applicant and Manufacturer
CAS Corporation #262, Geurugogae-ro, Gwangjeok-myeon Yangju-si, Gyeonggi-do, 11415 Republic of Korea
Identification of the certified type
A Non-automatic weighing instrument
Type : PDN-ccxx, with xx = BS, BD, US, RS, RT, RD (model variants), and cc = capacity of the scale
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 76 - Edition 2006 for accuracy class 111
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 22 March 2021
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-20.35
Revision 1
Project number 2590306
Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated OIML Type Evaluation Report:
- No. NMi-2457870-01 dated 25 June 2020 that includes 61 pages.
Characteristics of the non-automatic weighing instrument:
| Accuracy class | III |
| Maximum capacity | 6kg≤Max≤32kg |
| Verification scale interval | e≥1g |
| Weighing ranges | Single interval Multi-interval |
| Maximum number of scale intervals (one weighing range) | n≤6000 |
| Maximum number of scale intervals (multi-interval) | n≤3200 (per partial weighing range) |
| Maximum number of partial weighing ranges | 2 |
| Tare | T≤-Maxfor instruments with one weighing range T≤-Max1-e1for multi-interval instruments |
| Temperature range | -10℃/+40℃ |
| Power supply voltage | 5Vfrom a100-240VAC50/60Hzmains adapter,or 5VsuppliedbyaUSBhost |
| Application | Intended to be used for direct sales to the public |
| Software identification Version number | “V4XX”or“YY4XX” with non legally relevant parts: XX=any character reflecting software changes,and YY=any character reflecting the country code |
Production sites:
CAS Corporation: #262, Geurugogae-ro, Gwangjeok-myeon, Yangju-si, Gyeonggi-d, Rep. of Korea
CAS (Zhejiang) Electronics Co., Ltd: 99# Changjiang Road, Jiashan County, Zhejiang Province, China
Revision History
This revision replaces the previous version.
| Revision | Date | Change(s) |
| Initial | 2020-06-25 | - |
| 1 | 2021-03-22 | Adding production locations |