R76/2006-A-NL1-20.23
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-20.23 Project number 2481201 Page 1 of 2
Issuing authority NMi Certin B.V. Person responsible: M. Boudewijns
Applicant and Manufacturer
Fuzhou Lucky Star Co., Ltd. No.5, Shi Zi Ting Road, Cangshan Park Pushang Industrial District, Fuzhou, Fujian China
Identification of the An Indicator certified type Type
: XK-T1010PL
XK-T1020SL
XK-T1030SL
XK-T1050PL
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 76 - Edition 2006 for accuracy class or
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 25 May 2020
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R76/2006-A-NL1-20.23
Project number 2481201
Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated OIML Test Reports:
- No. NMi-11200266-01 dated 19 October 2011 that includes 34 pages;
No. NMi-11200266-02 dated 21 October 2011 that includes 31 pages.
Characteristics of the indicator:
| Configuration | Analog load cells | |
| Accuracy class | III | III |
| Weighing range(s) | Single interval | |
| Maximum number of scale intervals | n≤3000 | n≤1000 |
| Load cell excitation voltage | 5V DC | |
| Minimum signal input voltage | Umin=0mV | |
| Minimum input voltage per verification scale interval | 1μV | |
| Minimum load cell resistance | 87Ω | |
| Maximum load cell resistance | 1050Ω | |
| Fraction of the maximum permissible error | 0.5 | |
| Load cell connection | 6-wire(remote sensing) | |
| Maximum value of the cable length per cross wire section between the indicator and the junction box or load cells | No special cable length | |
| Temperature range | -10℃/+40℃ | |
| Power supply voltage | 7,5V DC by an AC/DC adapter | |
| Software identification | Version number:50.0 | |