Skip to content
OIML-CS Certificates

← R76

R76/2006-A-DK2-19.13

Applicant
Moorange Electronics MFG (Shanghai) Co., Ltd
Issuer
DK2
Issuing year
2019
Status
Valid

Source PDF (certificates/R76/2006/r076-2006-dk2-2019-13.pdf) · extracted by OCR from the digitalized tier of the corpus.

R76/2006-A-DK2-19.13

OIML Member State Denmark

OIML Certificate No.

R76/2006-A-DK2-2019.13

OIML CERTIFICATE ISSUED UNDER SCHEME A

OIML Issuing Authority
Name: FORCE Certification A/S Address: Park Allé 345, 2605 Brøndby, Denmark Person responsible: Leif Madsen
Applicant
Name: Moorange Electronics MFG (Shanghai) Co., Ltd. Address: Rm 202, Building 5, No. 59 Shennan Road, Shanghai 201108, China
ManufacturerMoorange Electronics MFG (Shanghai) Co., Ltd.
Identification of the certified type (the detailed characteristics will be defined in the additional pages) WX/CST/PC5/PC5H/PC6/PC6H/WXS/WST/PC5S/PC5SH/PC6S/PC6SH
Designation of the module (if applicable) Non-automatic electronic weighing instrument
This OIML Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML type evaluation report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML): OIML R 76-1, Edition (year): 2006 For accuracy class (if applicable): III or IIII
Revision No.DateDescription of the modification
-15 November 2019Initial version
Identification, signature and stamp The OIML Issuing Authority FORCE Certification A/S
Date:15 November 2019 Jens Hovgård Jensen 2019-11-15 Digitally signed by Jens Hovgård Jensen jhje@force.dk Certification Manager
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full.

Descriptive annex

Characteristics

Type:WX/WXS/CST/WTS/PC5/PC5S/PC5H/PC5PC6/PC6S/PC6H/PCSH
Accuracy class:III
Weighing range:Single interval or multi-range(2 ranges)
Maximum number of Verification Scale Intervals:3000 pr. interval
Maximum capacity Max:from3kg to60kg
Verification Scale Interval:e≥0.5g
Maximum tare effect:-Max
Minimum input voltage per VSI:1μV
Excitation voltage:5VDC
Minimum load cell input impedance:350ohm
Maximum input impedance:1000ohm
Mains power supply:100-240VAC,50/60Hz using externalAC to12VDC adapter
Operational temperature:-10℃to+40℃

Software

The software version is displayed on WX/WXS/CST/WTS as part of the turning off sequence. On PC5/PC5S/PC5H/PC5SH/PC6/PC6S/PC6H/PC6SH it can be displayed by pressing the "Tare" and "5" keys simultaneously.

The approved software versions are:

WX / WXS / CST / WTS version 100115 PC5 / PC5S / PC5H / PC5SH / PC6 / PC6S / PC6H / PC6SH version 200115

Interfaces

  • RS232

Devices

  • Initial zero setting device ( $ \leq 20% $ of Max)

  • Semi-automatic zero setting device ( $ \leq 4 % $ of Max)

  • Zero tracking device ( $ \leq 4 % $ of Max)

  • Semi-automatic subtractive tare balancing device

  • Subtractive preset tare device (CST and WTS models)

  • Gross / Net display

  • Price computing device (PC5/PC5S/PC5H/PC5SH/PC6/PC6S/PC6H/PC6SH only)

  • Totalization device (Shall be disabled on PC5/PC5S/PC5H/PC5SH/PC6/PC6S/PC6H/ PC6SH unless a printer is connected)

  • Manual checkweighing device

  • Piece counting device

  • Printing device

  • Gravity compensation device

  • Stable equilibrium, Zero, Gross, Net, PT and active range indicators.