- Applicant
- Cascade Corporation
- Issuer
- NL1
- Issuing year
- 2025
- Status
- Valid
R76/2006-A-NL1-25.12 Rev. 0
Page 1
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-25.12 revision 0
The Netherlands Project number 2683156
Page 1 of 2
Issuing authority NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and Cascade Corporation
Manufacturer 2201 NE 201st Ave
Fairview, OR 97024
USA
Identification of the A Non-automatic weighing instrument
certified type Type : A-WCI, A-WIS, A-WIF, A-WCH, A-WHS, A-WHF.
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s)
identified in the OIML Test Report) with the requirements of the following Recommendation of the
International Organization of Legal Metrology (OIML):
III IIII
OIML R 76-1:2006 for accuracy class or
This Certificate relates only to the metrological and technical characteristics of the type of measuring
instrument covered by the relevant OIML International Recommendation above-identified.
This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate’s reference number and the name of the
OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of
the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority NMi Certin B.V., OIML Issuing Authority NL1
23 July 2025
Certification Board
NMi Certin B.V. This document is issued under the This document is digitally
Thijsseweg 11 provision that no liability is signed and sealed. The
2629 JA Delft accepted and that the applicant digital signature can be
The Netherlands shall indemnify third-party liability. verified in the blue
T +31 88 6362332 ribbon on top of the
certin@nmi.nl The notification of NMi Certin B.V. electronic version of this
www.nmi.nl as Issuing Authority can be verified certificate.
at www.oiml.org
Page 2
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-25.12 revision 0
The Netherlands Project number 2683156
Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated
reports:
- No. NMi-2683156-02 dated 23 July 2025 that includes 14 pages;
- No. NMi-2683156-03 dated 23 July 2025 that includes 13 pages;
- No. NMi-2683156-04 dated 23 July 2025 that includes 11 pages;
- No. NMi-2683156-07 dated 23 July 2025 that includes 8 pages;
Characteristics of the non-automatic weighing instrument:
Accuracy class III or IIII
Calculated using the complatibility of modules from,
Maximum capacity
contained in R76 section F4.
Calculated using the complatibility of modules from,
Verification scale interval
contained in R76 section F4.
Actual scale interval e = d
Weighing range(s) Single interval
Maximum number of scale intervals
n 2500
(one weighing range)
Tare T -Max % for instruments with one weighing range
Temperature range -10 °C / +40 °C
CAI 1.2523
Software identification
DJB 3.20
Revision History
Revision Date Change
0 2025-07-23 Initial issue.
