- Applicant
- Shinko Denshi Co., Ltd.
- Issuer
- NL1
- Issuing year
- 2024
- Status
- Valid
R76/2006-A-NL1-24.15 Rev. 0
Page 1
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-24.15 revision 0
The Netherlands Project number 3798983
Page 1 of 2
Issuing authority NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and Shinko Denshi Co., Ltd.
Manufacturer 1-52-1 Itabashi, Itabashi-ku
Tokyo 173-0004
Japan
Identification of the A Non-automatic weighing instrument
certified type Type : FMA series
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s)
identified in the OIML Test Report) with the requirements of the following Recommendation of the
International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class II
This Certificate relates only to the metrological and technical characteristics of the type of measuring
instrument covered by the relevant OIML International Recommendation above-identified.
This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate’s reference number and the name of the
OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of
the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority NMi Certin B.V., OIML Issuing Authority NL1
15 October 2024
Certification Board
NMi Certin B.V. This document is issued under the This document is digitally
Thijsseweg 11 provision that no liability is signed and sealed. The
2629 JA Delft accepted and that the applicant digital signature can be
The Netherlands shall indemnify third-party liability. verified in the blue
T +31 88 6362332 ribbon on top of the
certin@nmi.nl The notification of NMi Certin B.V. electronic version of this
www.nmi.nl as Issuing Authority can be verified certificate.
at www.oiml.org
Page 2
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-24.15 revision 0
The Netherlands Project number 3798983
Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated
reports:
- No. NMi-3798983-01 dated 15 October 2024 that includes 46 pages;
- No. NMi-3798983-02 dated 15 October 2024 that includes 22 pages;
- No. NMi-3798983-03 dated 15 October 2024 that includes 22 pages.
Characteristics of the non-automatic weighing instrument:
Accuracy class II
Maximum capacity Max 62000 g Max 62 kg Max 310000 ct
Verification scale interval e 1 g e 0,001 kg e 5 ct
Actual scale interval e = d, e = 2d, e = 5d, or e = 10d e = d
Weighing range Single interval
Maximum number of scale intervals n = 62000
Tare T -Max
Temperature range +5 °C / +35 °C
100 – 240 V AC 50/60 Hz to 12V DC
Power supply voltage (by AC/DC plug-in power supply),
Or 6 V DC (by internal battery)
Software identification Checksum: 6D0B
Revision History
Revision Date Change
0 2024-10-15 Initial issue.
