- Applicant
- InBody Co., Ltd.
- Issuer
- NL1
- Issuing year
- 2025
- Status
- Valid
R76/2006-A-NL1-21.10 Rev. 1
Page 1
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-21.10 revision 1
The Netherlands Project number 3914466
Page 1 of 2
Issuing authority NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and InBody Co., Ltd.
Manufacturer 15, Heugam-gil, Ipjang-myeon, Seobuk-gu
Cheonan-si
Chungcheongnam-do 31025
Republic of Korea
Identification of the A Non-automatic weighing instrument
certified type Type : InBody970 / InBody970S
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s)
identified in the OIML Test Report) with the requirements of the following Recommendation of the
International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class III
This Certificate relates only to the metrological and technical characteristics of the type of measuring
instrument covered by the relevant OIML International Recommendation above-identified.
This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate’s reference number and the name of the
OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of
the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority NMi Certin B.V., OIML Issuing Authority NL1
24 October 2025
Certification Board
NMi Certin B.V. This document is issued under the This document is digitally
Thijsseweg 11 provision that no liability is signed and sealed. The
2629 JA Delft accepted and that the applicant digital signature can be
The Netherlands shall indemnify third-party liability. verified in the blue
T +31 88 6362332 ribbon on top of the
certin@nmi.nl The notification of NMi Certin B.V. electronic version of this
www.nmi.nl as Issuing Authority can be verified certificate.
at www.oiml.org
Page 2
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-21.10 revision 1
The Netherlands Project number 3914466
Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated
reports:
- No. NMi-2446349-01 dated 26 February 2021 that includes 54 pages;
- No. NMi-3914466-01 dated 24 October 2025 that includes 16 pages.
Characteristics of the non-automatic weighing instrument:
Accuracy class III
Maximum capacity 300 kg
Verification scale interval e = 100 g
Weighing range Single interval
Maximum number of scale intervals n = 3000
Temperature range +10 °C / +40 °C
Power supply voltage 12 V DC from 100-240 V AC 50/60 Hz plug-in power supply
Application Intended to be used for weighing patients
Type InBody970 InBody970S
IB970-1.x IB970S-1.x
(x = 0… 9 and represents (x = 0… 9 and represents the
Main software version Software the non-legally relevant non-legally relevant
identification software) software)
Data management
970DM-0421 970SDM-0421
software version
Load Cell Board Firmware version 970LCB-C013
Revision History
This revision replaces the previous version.
Revision Date Change(s)
0 2021-02-21 Initial issue.
1 2025-10-24 Added InBody970S, added supplementary legally relevant software
versions. Added the report NMi-3914466-01 for the evaluation of
the supplementary legally relevant software modules.
