- Applicant
- Bizerba SE & Co. KG
- Issuer
- NL1
- Issuing year
- 2025
- Status
- Valid
R76/2006-A-NL1-20.18 Rev. 6
Page 1
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-20.18 revision 6
The Netherlands Project number 4000660
Page 1 of 4
Issuing authority NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and Bizerba SE & Co. KG
Manufacturer Wilhelm-Kraut-Straße 65
72336 Balingen
Germany
Identification of the A Non-automatic weighing instrument
certified type Type : K3…
'...' denotes a placeholder for alternative variants not affecting
metrological parameters.
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s)
identified in the OIML Test Report) with the requirements of the following Recommendation of the
International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class III
This Certificate relates only to the metrological and technical characteristics of the type of measuring
instrument covered by the relevant OIML International Recommendation above-identified.
This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate’s reference number and the name of the
OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of
the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority NMi Certin B.V., OIML Issuing Authority NL1
18 November 2025
Certification Board
NMi Certin B.V. This document is issued under the This document is digitally
Thijsseweg 11 provision that no liability is signed and sealed. The
2629 JA Delft accepted and that the applicant digital signature can be
The Netherlands shall indemnify third-party liability. verified in the blue
T +31 88 6362332 ribbon on top of the
certin@nmi.nl The notification of NMi Certin B.V. electronic version of this
www.nmi.nl as Issuing Authority can be verified certificate.
at www.oiml.org
Page 2
O I M L C e r t i f i c a t e
Number R76/2006-A-NL1-20.18 revision 6
OIML Member State Project number 4000660
The Netherlands Page 2 of 4
The conformity was established by the results of tests and examinations provided in the associated
OIML Reports:
- No. NMi-2243314-01 revision 1 dated 12 August 2019 that includes 55 pages;
- No. NMi-2409818-01 dated 18 February 2020 that includes 11 pages;
- No. NMi-2431931-01 dated 14 April 2020 that includes 45 pages;
- No. NMi-2477454-01 dated 15 April 2021 that includes 51 pages;
- No. NMi-2477454-02 dated 15 April 2021 that includes 18 pages;
- No. NMi-2529842-01 dated 15 April 2021 that includes 17 pages;
- No. 1.12-4037754/6 dated 30 May 2011 that includes 56 pages;
- No. NMi-3001387-01 dated 18 October 2022 that includes 26 pages;
- No. NMi-3001387-02 dated 18 October 2022 that includes 14 pages;
- No. NMi-3741825-01 dated 29 August 2024 that includes 15 pages;
- No. NMi-4000660-01 dated 18 November 2025 that includes 20 pages.
Characteristics of the non-automatic weighing instrument:
Accuracy class III
Weighing module K3 3 kg Max 30 kg
Weighing module
Max 15 kg ScalePad USB
Maximum capacity Weighing module Calculated using the compatibility of modules
ADC-Box USB form, contained in EN 45501:2015 clause F.4
Weighing module
3 kg Max 30 kg QBase
Verification scale interval e 1 g
Single interval
Weighing range(s)
Multi-interval
Maximum number of scale intervals
n 6000 (one weighing range)
Maximum number of scale intervals n 3000
(multi-interval) (per partial weighing range)
Maximum number of
3
partial weighing ranges
Semi-automatic Tare T -100% of Max
100% of Max;
Preset Tare 100% of Max1 , in case of multi-interval
instruments
Temperature range -10 °C / +40 °C
Power supply voltage 120 – 240 V AC 50/60 Hz
Application Intended to be used for direct sales to the public
Terminal software identification:
Page 3
O I M L C e r t i f i c a t e
Number R76/2006-A-NL1-20.18 revision 6
OIML Member State Project number 4000660
The Netherlands Page 3 of 4
Software version number Software ID
1) Software ID (Linux) (legally relevant) (Windows)
013 7640 0369
015 8282 1171 Scale OEM Module
050 5275 8164
051 8010 4115
060 5593 1698
A/D board software identification:
Version number (legally
1) Software ID relevant)
010 6153
ADW
011 5232
030 1446
014 4751
1) The identification of the non-legally relevant software version can optionally be added to the
identification of the legally relevant software version, separated by "::" (example: "013::x.y" or
"010::x.y" or "030::x.y" or "014::x,y").
Page 4
O I M L C e r t i f i c a t e
Number R76/2006-A-NL1-20.18 revision 6
OIML Member State Project number 4000660
The Netherlands Page 4 of 4
Revision History
This revision replaces the previous versions.
Revision Date Changes
0 2020-04-14 -
1 2020-07-20 Correction of the maximum capacity specification
(30 kg instead of 15 kg).
2 2021-04-15 Added Scale OEM Module software version 015 and ID’s 8282 and
1171
Added OIML report NMi-2477454-01
3 2022-10-18 Adding ADPD ADC-Box USB and weighing modules ScalePad USB
and QBase
4 2023-01-05 Editorial changes to the table of characteristics.
Addition of a new software version.
5 2024-08-29 Added a new software version
Added report NMi-3741825-01
6 2025-11-18 Adding software versions and test report NMi-4000660-01
