- Applicant
- DIGI SINGAPORE PTE LTD.
- Issuer
- NL1
- Issuing year
- 2024
- Status
- Valid
R76/2006-A-NL1-20.17 Rev. 2
Page 1
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-20.17 revision 2
The Netherlands Project number 3720278
Page 1 of 3
Issuing authority NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and DIGI SINGAPORE PTE LTD.
Manufacturer 4 Leng Kee Road
#06-01 SIS Building
159088 Singapore
Identification of the A Non-automatic weighing instrument
certified type Type : SM-6000 series
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s)
identified in the OIML Test Report) with the requirements of the following Recommendation of the
International Organization of Legal Metrology (OIML):
OIML R 76-1:2006 for accuracy class III
This Certificate relates only to the metrological and technical characteristics of the type of measuring
instrument covered by the relevant OIML International Recommendation above-identified.
This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate’s reference number and the name of the
OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of
the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority NMi Certin B.V., OIML Issuing Authority NL1
30 May 2024
Certification Board
NMi Certin B.V. This document is issued under the This document is digitally
Thijsseweg 11 provision that no liability is signed and sealed. The
2629 JA Delft accepted and that the applicant digital signature can be
The Netherlands shall indemnify third-party liability. verified in the blue
T +31 88 6362332 ribbon on top of the
certin@nmi.nl The notification of NMi Certin B.V. electronic version of this
www.nmi.nl as Issuing Authority can be verified certificate.
at www.oiml.org
Page 2
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-20.17 revision 2
The Netherlands Project number 3720278
Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated
reports:
- No. NMi-1901130-01 dated 22 January 2018 that includes 63 pages;
- No. NMi-1902316-01 dated 14 August 2018 that includes 46 pages;
- No. NMi-1902316-02 dated 14 August 2018 that includes 20 pages;
- No. NMi-2442339-01 dated 26 March 2020 that includes 20 pages;
- No. NMi-2486729-01 dated 16 October 2020 that includes 26 pages.
- No. NMi-3720278-01 dated 30 May 2024 that includes 13 pages.
Characteristics of the non-automatic weighing instrument:
Accuracy class III
Maximum capacity 6 kg Max 150 kg
Verification scale interval e 1 g e 2 g
Single interval
Weighing ranges
Multi-interval
Maximum number of scale intervals
n 6000 divisions n 7500 divisions (one weighing range)
Maximum number of scale intervals
n 3000 divisions (multi-interval)
Maximum number of partial weighing ranges 2
T -50% for instruments with one
weighing range
Tare
T -Max1 for multi-interval
instruments
Temperature range -10 °C / +40 °C
Power supply voltage 220 – 240 V AC 50/60 Hz
Intended to be used for direct sales to
Application
the public
Version number Checksum
7.1.1.23 89E66100
7.1.1.25 F43E2E4E
7.1.1.31 DD724AA2
Software identification
7.1.1.32 DCD04CA1
8.1.1.40 18425002
11.1.1 BA5A6E5C
12.1.1 3D93F5F4
The software identification is displayed at start-up or after pressing the key sequence:
- “Menu / Maintenance / System info”.
Page 3
O I M L C e r t i f i c a t e
OIML Member State Number R76/2006-A-NL1-20.17 revision 2
The Netherlands Project number 3720278
Page 3 of 3
The non-automatic weighing instrument has embedded software.
The instrument can be used in a master/slave configuration, as a master or as a slave.
The instrument can be used as a self-service scale.
Revision History
This revision replaces the previous versions.
Revision Date Change(s)
0 2020-03-27 Initial issue.
1 2020-10-16 Revision of the certificate to add new version with external
platform and different load cell.
2 2024-05-30 Adding alternative I/O board.
