- Applicant
- Rice Lake Weighing Systems
- Issuer
- NL1
- Issuing year
- 2019
- Status
- Valid
R76/2006-A-NL1-19.56 Rev. 1
Page 1
O I M L C e r t i f i c a t e
Number R76/2006-A-NL1-19.56 Revision 1
Project number 2433604
OIML Member State Page 1 of 2
The Netherlands
Issuing authority NMi Certin B.V.
Person responsible: F. van Booma–de Smit
Applicant and Rice Lake Weighing Systems
Manufacturer 230 West Coleman Street
Rice Lake, WI 54868
United States of America
Identification of the An Indicator
certified type Type : 680 Plus-2A
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s)
identified in the OIML Test Report) with the requirements of the following Recommendation of the
International Organization of Legal Metrology (OIML):
OIML R 76 - Edition 2006 for accuracy class III or IIII
This Certificate relates only to the metrological and technical characteristics of the type of measuring
instrument covered by the relevant OIML International Recommendation above-identified.
This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate’s reference number and the name of the
OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of
the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority NMi Certin B.V., OIML Issuing Authority NL1
22 November 2019
Certification Board
NMi Certin B.V. This document is issued under the This document is digitally
Thijsseweg 11 provision that no liability is signed and sealed. The
2629 JA Delft accepted and that the applicant digital signature can be
The Netherlands shall indemnify third-party liability. verified in the blue
T +31 88 6362332 ribbon at the top of the
certin@nmi.nl The notification of NMi Certin B.V. electronic version of this
www.nmi.nl as Issuing Authority can be verified certificate.
at www.oiml.org
Page 2
O I M L C e r t i f i c a t e
Number R76/2006-A-NL1-19.56 Revision 1
Project number 2433604
OIML Member State Page 2 of 2
The Netherlands
The conformity was established by the results of tests and examinations provided in the associated
OIML Type Evaluation Report:
- No. NMi-2343404-01 dated 1 November 2019 that includes 51 pages.
Characteristics of the indicator:
Configuration Analog load cells
Accuracy class III or IIII
Weighing range(s) Single interval
Maximum number of scale intervals n 10000
Load cell excitation voltage 10 V DC
Minimum signal input voltage Umin = 0 mV
Minimum input voltage per verification
1 µV
scale interval
Minimum load cell resistance 43
Maximum load cell resistance 1050
Fraction of the maximum permissible error 0,5
4-wire or
Load cell connection
6-wire (remote sensing)
1320,4 m/mm2
Maximum value of the cable length per
(No special cable length)
cross wire section between the indicator and
In case a 4-wire connection is used the load cells
the junction box or load cells
are connected directly without junction box
Temperature range -10 °C / +40 °C
Power supply voltage 100– 240 V AC 50/60 Hz
Software identification Version number: v 1.00.xx
Revision History
This revision replaces the previous version(s).
Revision Date Change(s)
Initial 01-11-2019 -
1 22-11-2019 Correction Software version
