- Applicant
- Hottinger Baldwin Messtechnik GmbH
- Issuer
- NL1
- Issuing year
- 2022
- Status
- Valid
R76/2006-A-NL1-19.36 Rev. 1
Page 1
O I M L C e r t i f i c a t e
Number R76/2006-A-NL1-19.36 Revision 1
OIML Member State Project number 2623826
The Netherlands Page 1 of 2
Issuing authority NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and Hottinger Brüel & Kjaer GmbH
Manufacturer Im Tiefen See 45
D-64293 Darmstadt
Germany
Identification of the An Analog data processing device (ADPD)
certified type Type : PAD-400xA
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s)
identified in the OIML Test Report) with the requirements of the following Recommendation of the
International Organization of Legal Metrology (OIML):
OIML R 76 - Edition 2006 for accuracy class III or IIII
This Certificate relates only to the metrological and technical characteristics of the type of measuring
instrument covered by the relevant OIML International Recommendation above-identified.
This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate’s reference number and the name of the
OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of
the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority NMi Certin B.V., OIML Issuing Authority NL1
31 March 2022
Certification Board
NMi Certin B.V. This document is issued under the This document is digitally
Thijsseweg 11 provision that no liability is signed and sealed. The
2629 JA Delft accepted and that the applicant digital signature can be
The Netherlands shall indemnify third-party liability. verified in the blue
T +31 88 6362332 ribbon on top of the
certin@nmi.nl The notification of NMi Certin B.V. electronic version of this
www.nmi.nl as Issuing Authority can be verified certificate.
at www.oiml.org
Page 2
O I M L C e r t i f i c a t e
Number R76/2006-A-NL1-19.36 Revision 1
OIML Member State Project number 2623826
The Netherlands Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated
OIML Reports:
- No. NMi-14200646-01 dated 13 June 2016 that includes 43 pages;
- No. NMi-14200646-02 dated 13 June 2016 that includes 17 pages;
- No. NMi-2623826-02 dated 31 March 2022 that includes 8 pages.
Characteristics of the indicator:
Configuration Analog load cells
Accuracy class III or IIII
Single interval
Weighing range(s)
Multiple range
Maximum number of scale intervals
n 6000 (one weighing range)
Maximum number of scale intervals
n 3000 (per weighing range) (multiple range)
Maximum number of weighing ranges 2
Load cell excitation voltage 5 V AC square wave
Minimum input voltage per verification scale interval 0,5 µV
Minimum load cell resistance 300
Maximum load cell resistance 900
Load cell interface 4-wire
Maximum value of the cable length per cross wire
section between the ADPD and the junction box or 3 m
load cells
temperature range -10 °C / +40 °C Climatic
environment humidity non-condensing
Electromagnetic environment class E2
Power supply voltage 12 – 30 V DC
Version number: 80, Checksum: 240413
Software identification or
Version number: 81, Checksum: 244554
Revision History
This revision replaces the previous version.
Revision Date Change(s)
Initial 2019-07-09 -
1 2022-03-31 Added software version
