R61/2017-A-NL1-26.02 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-26.02 revision 0 Project number 3891402 Page 1 of 3
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Accrapak Systems Limited Unit 57 Burtonwood Industrial Centre Warrington, WA5 4HX United Kingdom
Identification of the certified type
An Automatic gravimetric filling instrument Type : 600DC
Characteristics
This OIML Certificate is issued under scheme A.
See next page
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 61-1:2017 for reference class Ref 0,2
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
This certificate and supporting reports comply with the requirements of OIML-CS-PD-07 clause 6.2.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 11 March 2026
NMi Certin B.V.
Thijsseweg 11
2629 JA Delft
The Netherlands
T +31 88 6362332
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
The notification of NMi Certin B.V. as Issuing Authority can be verified at www.oiml.org
This document is digitally signed and sealed. The digital signature can be verified in the blue ribbon on top of the electronic version of this certificate.
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-26.02 revision 0
Project number 3891402
Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated report:
No. NMi-3891402-01 dated 11 March 2026 that includes 31 pages.
Characteristics of the automatic gravimetric filling instrument
The indicator:
| Producer | Type | Certificate number |
| SysTec Systemtechnik und Industrieautomation GmbH | IT1/IT3 series | R76-2006-NL1-16.57 |
Load cell:
| Producer | Type | Certificate number |
| TEDEA-HUNTLEIGH | 1260 | R60/2000-NL-02.34 |
Rated minimum fill with automatic tare-setting or automatic zero-setting as part of every weighing cycle:
| Average number of loads per fill: | 1 | |||
| Accuracy class: | X(0,2) | X(0,5) | X(1) | X(2) |
| d[g] | Minfill[g] | |||
| 0,5 | 28,0 | 11,0 | 5,5 | 3,0 |
| 1 | 111 | 22 | 11 | 6 |
| 2 | 334 | 44 | 22 | 12 |
| 5 | 1665 | 335 | 110 | 30 |
| 10 | 3330 | 1330 | 330 | 110 |
| 20 | 6660 | 2660 | 1340 | 340 |
| 50 | 25000 | 6650 | 3350 | 1650 |
| 100 | 50000 | 20000 | 6700 | 3300 |
| 200 | 100000 | 40000 | 20000 | 6600 |
| ≥500 | 500d | 200d | 100d | 50d |
OIML Member State The Netherlands
OIML Certificate
Number R61/2017-A-NL1-26.02 revision 0 Project number 3891402 Page 3 of 3
Revision History
| Revision | Date | Change(s) |
| 0 | 2026-03-11 | Initial issue. |