R61/2017-A-NL1-26.01 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-26.01 revision 0 Project number 3813609 Page 1 of 3
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Fuller Technologies Italy S.p.A. Via G. Marconi 20 24030, Valbrembo (BG) Italy
Identification of the certified type
An Automatic gravimetric filling instrument Type : Ventodigit V
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 61-1:2017 for reference class Ref 0,5
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 13 February 2026
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-26.01 revision 0 Project number 3813609 Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated report:
No. NMi-3813609-04 dated 13 February 2026 that includes 37 pages.
Characteristics of the automatic gravimetric filling instrument
| Method of operation | filling by one weighing cycle | |
| Reference accuracy class | Ref(0,5) the operational accuracy classX(x)is determined at the time of putting into use | |
| Electromagnetic environment class | E2 | |
| Climatic environment | temperature range | -10℃/+40℃ |
| humidity | non-condensing | |
| intended location | closed | |
| Maximum capacity | ≤60kg | |
| Rated minimum fill | Min=minfill See table below | |
| Power supply voltage | 18-36VDC | |
| Software identification measurement electronics | Version:0.04-x.xx.xx (xis a number between0and9) | |
Rated minimum fill (Minfill):
| Minfill [g] | ||||
| N umber of loads per fill=1 | ||||
| d[g] | X(0,2) | X(0,5) | X(1) | X(2) |
| 1 | 333 | 44 | 22 | 11 |
| 2 | 1334 | 178 | 44 | 22 |
| 5 | 3335 | 1335 | 335 | 110 |
| 10 | 6670 | 2670 | 1330 | 330 |
| 20 | 20000 | 5340 | 2660 | 1340 |
| 50 | 50000 | 20000 | 6650 | 3350 |
| 100 | 100000 | 40000 | 20000 | 6700 |
| ≥200 | 1000d | 400d | 200d | 100d |
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-26.01 revision 0
Project number 3813609
Page 3 of 3
Revision History
| Revision | Date | Change(s) |
| 0 | 2026-02-13 | Initial issue. |