R61/2017-A-NL1-23.02 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-23.02 revision 0
Project number 3469362
Page 1 of 4
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Yamato Scale Co., Ltd.
5-22, Saenba-cho
Akashi, 673-8688
Japan
Identification of the certified type
An Automatic gravimetric filling instrument Type : TSD-N3
Characteristics
This OIML Certificate is issued under scheme A.
See next page
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 61-1:2017 for reference class Ref (0,5)
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 13 June 2023
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-23.02 revision 0
Project number 3469362
Page 2 of 4
The conformity was established by the results of tests and examinations provided in the associated OIML Type Evaluation Reports:
No. NMi-3469362-01 dated 2 June 2023 that includes 35 pages;
No. NMi-3469362-02 dated 2 June 2023 that includes 22 pages;
No. NMi-3469362-03 dated 2 June 2023 that includes 19 pages.
Characteristics of the automatic gravimetric filling instrument
| Method of operation | selective combination weighing | |
| Reference accuracy class | Ref(0,5) the operational accuracy classX(x)是 determined at the time of putting into use | |
| Electromagnetic environment class | E2 | |
| Climatic environment | temperature range | 0℃/+40℃ |
| humidity | non-condensing | |
| intended location | Closed | |
| Maximum capacity (of each load receptor) | Max≤1.5kg | |
| Minimum capacity (of each load receptor) | Min≥8g | |
| Rated minimum fill | MinFill≥Min | |
| Maximumfill | Maxfill是 determined at the time of putting into use | |
| Maximum number of load receptors | 16 | |
| Power supply voltage | 200-240V AC 50/60Hz | |
| Software identification A/D board(ADPD) | Version:1.01.00 Checksum:A71E0E37 | |
| Software identification Main board(ADPD) | Version:1.02.00 Checksum:8CA93123 | |
| Software identification DDPD | Version:1.02.00 Checksum:4C2C3174 | |
Software:
The identification number will be displayed after pressing the key sequence:
From the main menu choose "trouble shooting";
Select "software version".
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-23.02 revision 0
Project number 3469362
Rated minimum fill (Minfill):
Page 3 of 4
| Average number of fills=2 | Average number of fills=3 | |||||
| d[g] | X(0,5) | X(1) | X(2) | X(0,5) | X(1) | X(2) |
| 1 | 31 | 16 | 8 | 38 | 19 | 10 |
| 2 | 126 | 32 | 16 | 154 | 38 | 20 |
| 5 | 470 | 155 | 40 | 1155 | 190 | 50 |
| 10 | 1890 | 470 | 160 | 2310 | 1150 | 190 |
| Average number of fills=4 | Average number of fills=5 | |||||
| d[g] | X(0,5) | X(1) | X(2) | X(0,5) | X(1) | X(2) |
| 1 | 44 | 22 | 11 | 50 | 25 | 12 |
| 2 | 178 | 44 | 22 | 198 | 50 | 24 |
| 5 | 1335 | 335 | 110 | 1490 | 375 | 125 |
| 10 | 2670 | 1330 | 330 | 2980 | 1490 | 370 |
| Average number of fills=6 | Average number of fills=7 | |||||
| d[g] | X(0,5) | X(1) | X(2) | X(0,5) | X(1) | X(2) |
| 1 | 109 | 27 | 14 | 118 | 29 | 15 |
| 2 | 326 | 108 | 28 | 352 | 118 | 30 |
| 5 | 1635 | 410 | 135 | 1765 | 440 | 145 |
| 10 | 3270 | 1630 | 410 | 3530 | 1760 | 440 |
OIML Certificate
OIML Member State The Netherlands
Number R61/2017-A-NL1-23.02 revision 0 Project number 3469362 Page 4 of 4
Page 4 of 4
Revision History
| Revision | Date | Change(s) |
| 0 | 13 June 2023 | Initial issue. |