R60/2021-A-NL1-25.10 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R60/2021-A-NL1-25.10 revision 0 Project number 3958128 Page 1 of 3
Issuing authority
Applicant and Manufacturer
NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
PESAGE NOUVELLE AQUITAINE
3, rue des Beaux Vallons
17540, Saint Sauveur d'Aunis
France
Identification of the certified type
A compression load cell, with strain gauge. Registered trade name PESAGE NOUVELLE AQUITAINE
Type
PNA-ZSF-A-...
PNA-ZSFY-A-... or
PNA-ZSFYB-A-...
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 60-1:2021 for accuracy class C
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
This certificate and supporting reports comply with the requirements of OIML-CS-PD-07 clause 6.2.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 19 June 2025
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R60/2021-A-NL1-25.10 revision 0
Project number 3958128
Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated reports:
No. R60\2000-NL1-05.17A dated 12 October 2005 that includes 40 pages; No. R60\2000-NL1-05.17B dated 12 October 2005 that includes 37 pages.
Characteristics of the load cell:
| PNA-ZSF-A-... | PNA-ZSFY-A-... | PNA-ZSFYB-A-... | |
| Characterization of load cell capabilities | Analog-passive load cell | ||
| Maximum capacity ($E_{\mathrm{max}}$) | 10000kg up to and including50000kg | ||
| Minimum dead load | 0kg | ||
| Accuracy Class | C | ||
| Rated Output | 2mV/V±0.002mV/V | ||
| Maximum number of load cell intervals(n)^{(1)}$ | 3000 | ||
| Ratio of minimum LC Verification interval^{(1)}$ $Y=E_{\mathrm{max}}/v_{\mathrm{min}}$ | 10000 | ||
| Ratio of minimum dead load output return^{(1)}$ $Z=E_{\mathrm{max}}/(2*\mathrm{DR})$ | 3000 | ||
| Input impedance | 400$\Omega\pm20\Omega$ | 730$\Omega\pm30\Omega$ | 1100$\Omega\pm10\Omega$ |
| Temperature range | -10℃/+40℃ | ||
| Fraction $p_{\mathrm{LC}}$ | 0,7 | ||
| Humidity Class | CH | ||
| Safe overload | 150% of $E_{\mathrm{max}}$ | ||
| Output impedance | 352$\Omega\pm2\Omega$ | 705$\Omega\pm5\Omega$ | 1005$\Omega\pm5\Omega$ |
| Recommended excitation | 10/12V DC | ||
| Excitation maximum | 15V DC | ||
| Transducer material | Alloy steel | ||
| Atmospheric protection | Welded steel cover | ||
- The characteristics for $ n_{\mathrm{max}} $ , Y and Z can be reduced separately.
Each load cell produced is provided with an accompanying document with information about its characteristics.
OIML Certificate
OIML Member State The Netherlands
Number R60/2021-A-NL1-25.10 revision 0
Project number 3958128
Page 3 of 3
Revision History
| Revision | Date | Change(s) |
| 0 | 2025-06-19 | Initial issue. |