R60/2021-A-NL1-25.03 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R60/2021-A-NL1-25.03 revision 0 Project number 3669796 Page 1 of 3
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
VPG Precision Transducers India Ltd. OZ-22 Hi Tech SEZ Kancheepuram 602105 Tamil Nadu, India
Identification of the certified type
A compression load cell, with strain Registered trade name
gauges, equipped with electronics. VPG force sensors / Revere / Tedea Huntleigh
Type
: RLCD
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 60-1:2021 for accuracy class C
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 27 February 2025
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R60/2021-A-NL1-25.03 revision 0 Project number 3669796 Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated reports:
No. NMi-3669796-01 dated 27 February 2025 that includes 86 pages;
No. NMi-3669796-02 dated 27 February 2025 that includes 14 pages.
Characteristics of the load cell:
| Characterization of load cell capabilities | Digital load cell with data processing |
| Maximum capacity ($E_{\max}$) | 10t up to and including 50t |
| Minimum dead load | 0t |
| Accuracy Class | C |
| Maximum number of load cell intervals(n)^{(1)}$ | 3000 |
| Ratio of minimum LC Verification interval$^{(1)}$ $Y=E_{\max}/v_{\min}$ | 30000 |
| Ratio of minimum dead load output return$^{(1)}$ $Z=E_{\max}/(2*DR)$ | 4500 |
| Temperature range | -10℃/+40℃ |
| Fraction $p_{LC}$ | 0,8 |
| Humidity Class | CH |
| Safe overload | 150% of $E_{\max}$ |
| Recommended excitation | 12V DC |
| Excitation maximum | 32V DC |
| Transducer material | Stainless steel |
| Atmospheric protection | Hermetically welded |
| Electromagnetic environment class | E2 |
| Number of counts for $E_{\max}$ | ≥Y*5/p$_{LC}$ |
| Software identification | SW Version:1.xx^{(2)}$ |
Remarks:
The characteristics for $ n_{\mathrm{max}} $ Y and Z can be reduced separately.
xx is a number between 00 and 99 representing updates of the non-legally relevant part of the software.
Each load cell produced is provided with an accompanying document with information about its characteristics.
The above identified Type (represented by the sample(s) identified in the OIML Test Report) have been found to comply with the additional national requirements established by the
OIML Certificate
OIML Member State The Netherlands
Number R60/2021-A-NL1-25.03 revision 0 Project number 3669796 Page 3 of 3
United States of America (NIST Handbook 44 and NCWM Publication 14), included in the Utilizer Declaration:
R 60 OIML-CS rev.2 Additional requirements from the United States Accuracy class III L; R 60 OIML-CS rev.2 Additional requirements from the United States Marking requirements.
Revision History
| Revision | Date | Change(s) |
| 0 | 2025-02-27 | Initial issue. |