- Applicant
- 3S Fabrications (Pvt) Ltd.
- Issuer
- DE1
- Issuing year
- 2024
- Status
- Valid
R60/2021-A-DE1-24.02
| OIML Certification System | PTB
Physikalisch-Technische Bundesanstalt
Braunschweig und Berlin |
| OIML Member State
Germany | OIML Certificate No.
R60/2021-A-DE1-24.02 |
| OIML CERTIFICATE ISSUED UNDER SCHEME A |
| OIML Issuing Authority
Name: Physikalisch-Technische Bundesanstalt,
Conformity Assessment Body
Address: Bundesallee 100, 38116 Braunschweig, GERMANY
Person responsible: Dr.-Ing. Prof. h. c. Frank Härtig |
| Applicant
Name: 3S Fabrications (Pvt) Ltd
Address: Venus Mills, Etiyawela, Daluwela
61130 Dankotuwa
Sri Lanka |
| Manufacturer
Name: 3S Fabrications (Pvt) Ltd
Address: Venus Mills, Etiyawela, Daluwela
61130 Dankotuwa
Sri Lanka |
| Identification of the certified type (the detailed characteristics will be defined in the additional pages)
Load cell
Type: SPH |
| Designation of the module (if applicable)
Analog load cell |
| This OIML Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML type evaluation report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 60
Edition (year): 2021
For accuracy class (if applicable): C3 |
| Revision No. | Date | Description of the modification |
| 0 | 14.06.2024/25.06.2024 | Initial issuing/Missing load cell data added |
| | |
| | |
| | |
| The Issuing Authority |
| PTB
Physikalisch-Technische Bundesanstalt
Nationales Metrologieinstitut
digital gesiegelt
Physikalisch-Technische Bundesanstalt
25.06.2024
14:09:13 +02 |
| Jonas Mecke |
| Member of Conformity Assessment Body |
| Date:25.06.2024 |
| Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full. |
| Model designation |
| Maximum capacity | Emax | kg | 270 |
| Accuracy class | | - | C3 |
| Maximum number of load cell intervals | nLC | - | 3.000 |
| Minimum load cell verification interval | vmin=(Emax/Y) | a) | Emax/12.000 |
| Apportionment factor | pLC | - | 0.7 |
a) Minimum dead load: $ 0 % \cdot E_{\mathrm{m a x}} $; Safe overload: $ 2 0 0 % \cdot E_{\mathrm{m a x}} $
