R51/2006-A-NL1-23.04 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-23.04 revision 0
Project number 2403273
Page 1 of 3
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Ishida Europe Ltd. 11 Kettles Wood Drive Woodgate Business Park Birmingham B32 3DB United Kingdom
Identification of the certified type
An Automatic catchweighing instrument
DACS-GN-S150 DACS-GN-S300
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 51 - Edition 2006 (E) for accuracy class XIII(1)
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 10 January 2023
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-23.04 revision 0 Project number 2403273 Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated OIML Type Evaluation Reports:
Page 2 of 3
No. NMi-2403273-01 dated 10 January 2023 that includes 33 pages;
No. NMi-2403273-02 dated 10 January 2023 that includes 11 pages;
No. NMi-2409910-03 dated 10 January 2023 that includes 38 pages.
Characteristics of the automatic catchweighing instrument
| Destined to be used as | Checkweigher | |||
| Accuracy class | XIII(1) | |||
| Maximum capacity | Max≤30kg | |||
| Minimum capacity | Min≥300g | |||
| Verification scale interval | e≥5g | |||
| Weighing range(s) | Single intervalMultiple range | |||
| Maximum number of scale intervals | n≤3000 | |||
| Maximum number of weighing ranges | 2 | |||
| Tare | T≤-Max | |||
| Maximum load transport system speed | See below | |||
| Dynamic setting(adjustment range referred to setpoint) | ±10% | |||
| Electromagnetic environment class | E2 | |||
| Climatic environment | temperature range | 0℃/+40℃ | ||
| humidity | non-condensing | |||
| intended location | closed | |||
| Power supply voltage | 200-240V AC50/60Hz | |||
| Software module | MCU | DRV | ADC | |
| Software identification | Version number | - | - | N52001C |
| Checksum1) | 0x5516 | 0x8DB0 | - | |
The identification number will be displayed at start-up or after pressing the key sequence: Settings (sprockets icon) $ \rightarrow $ Program version information.
Maximum load transport system speed:
| e≥5g | e≥10g | ||
| Load(kg) | Speed(m/min) | Load(kg) | Speed(m/min) |
| 0,300-0,495 | ≤10 | 2,50-30,00kg | ≤35 |
| 0,500-2,495 | ≤15 | ||
| 2,500-9,995 | ≤35 | ||
| 10,000-15,000 | ≤30 | ||
OIML Member State The Netherlands
OIML Certificate
Number R51/2006-A-NL1-23.04 revision 0
Project number 2403273
Page 3 of 3
Revision History
| Revision | Date | Change(s) |
| 0 | 2023-01-10 | Initial issue |