R51/2006-A-NL1-23.01 Rev. 2
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-23.01 revision 2 Project number 3720264 Page 1 of 2
Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
GIRO GH S.A.
Jaume Ribo 35-37
08911 Badalona
Spain
Identification of the An Automatic catchweighing instrument certified type Type : CHW-S40, CHW-C40
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 51-1:2006 for accuracy class XIII(1) or Y(a)
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 8 December 2023
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-23.01 revision 2 Project number 3720264 Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated reports:
No. NMi-2416686-01 dated 24 January 2023 that includes 39 pages;
Page 2 of 2
No. NMi-2416686-02 dated 24 January 2023 that includes 18 pages;
No. NMi-3636220-01 dated 27 February 2023 that includes 11 pages.
Characteristics of the automatic catchweighing instrument
| Destined to be used as | Checkweigher | |
| Accuracy class | XIII(1) or Y(a) the actual accuracy class determined at the time of putting into use | |
| Maximum capacity | Max≤6kg | |
| Minimum capacity | Min≥350g | |
| Verification scale interval | e≥2g | |
| Weighing range(s) | Single interval | |
| Maximum number of scale intervals (single interval) | n≤3000 | |
| Maximum load transport system speed | 54m/min | |
| Electromagnetic environment class | E1 | |
| Climatic environment | temperature range | +5℃/+40℃ |
| humidity | non-condensing | |
| intended location | closed | |
| Power supply voltage | 200-230V AC 50/60Hz | |
| Software identification | Version | 1.00.379 |
| Checksum | 0xC76579FF | |
Software:
- The identification number will be displayed after pressing the key sequence: INFORMATION (marked as symbol "i" on the right side of the main screen), and then selecting DEVICE INFORMATION.
Revision History
This revision replaces the previous versions.
| Revision | Date | Change(s) |
| 0 | 2023-02-07 | Initial issue. |
| 1 | 2023-02-27 | Additional test report included. |
| 2 | 2023-12-08 | Adding type name. |