R51/2006-A-NL1-21.04 Rev. 2
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-21.04 revision 2 Project number 3891265 Page 1 of 3
Issuing authority
NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Bizerba SE & Co. KG Wilhelm-Kraut-Straße 65 72336 Balingen Germany
Identification of the certified type
An Automatic catchweighing instrument Type : WP...
Characteristics
This OIML Certificate is issued under scheme A.
See next page
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 51-1:2006 for accuracy class Y(a) or Y(b)
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 2 January 2025
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-21.04 revision 2
Project number 3891265
The conformity was established by the results of tests and examinations provided in the associated reports:
Page 2 of 3
No. NMi-1901630-01 dated 13 July 2018 that includes 54 pages;
No. NMi-3547281-01 dated 1 May 2023 that includes 20 pages;
No. NMi-3741825-01 dated 29 August 2024 that includes 15 pages.
Characteristics of the automatic catchweighing instrument
| Destined to be used as | catchweigher, weight labeller, weight/price labeller | |
| Accuracy class | Y(a), Y(b) | |
| Maximum capacity | 3kg≤Max≤15kg | |
| Minimum capacity | Min≥20e for classY(a)Min≥10e for classY(b) | |
| Verification scale interval | e≥1g | |
| Weighing ranges | Single intervalMulti-interval | |
| Maximum number of scale intervals(single interval) | n≤3000 divisions | |
| Maximum number of scale intervals(multi-interval) | n≤3000 divisions(per partial weighing range) | |
| Maximum number of partial weighing ranges | 2 | |
| Tare | T≤-0,2Max | |
| Electromagnetic environment class | E2 | |
| Climatic environment | temperature range | -10℃/+40℃ |
| humidity | non-condensing | |
| intended location | closed | |
| Power supply voltage | 400VAC50Hz,or208-240VAC50/60Hz,or230VAC50/60Hz | |
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-21.04 revision 2
Project number 3891265
Page 3 of 3
| Software identification for program modules1) | RetailPowerScale | Version | Software ID(Windows) | Software ID(Linux) |
| 012 | 6914 | 7130 | ||
| 014 | 0788 | 2354 | ||
| Scale OEM Module | 011 | 3362 | 1418 | |
| 013 | 7640 | 0369 | ||
| Software identification for AD board2) | ADW ID | Software version | Software ID | |
| 047195xxxx3) | 004 | 7195 | ||
| 106153xxxx3) | 010 | 6153 | ||
| 115232xxxx3) | 011 | 5232 | ||
| 301146xxxx3) | 030 | 1446 | ||
| 144751xxxx3) | 014 | 4751 |
$ ^{1} $ The identification of the non-legally relevant software version can optionally be added to the identification of the legally relevant software version, separated by "::" (example: "013::x.y").
- Alternatively, the software version number and the software-ID can be displayed separately. In this case, the identification of the non-legally relevant software version can optionally be added to the identification of the legally relevant software version separated by "::" (example: "6153 010::xx.xx").
$ ^{3)} $ "x" represents the non-legally relevant part of the software and can be any number between 0...9.
Software:
- The identification number will be shown after tapping the part of display with inscriptions Max, Min, e and the accuracy class at least for 3 seconds.
Revision History
This revision replaces the previous versions.
| Revision | Date | Change(s) |
| 0 | 2021-04-02 | Initial issue. |
| 1 | 2023-05-04 | Additional type evaluation report and new software version included. |
| 2 | 2025-01-02 | Addition of an alternative A/D board and a new software version. |