Skip to content

← R51

R51/2006-A-NL1-20.03 Rev. 1

Applicant
Mettler-Toledo GmbH
Issuer
NL1
Issuing year
2026
Status
Valid

Source PDF (certificates/R51/2006/r51-2006-nl1-2020-03-rev1.pdf) · extracted by OCR from the digitalized tier of the corpus.

R51/2006-A-NL1-20.03 Rev. 1

OIML Certificate

OIML Member State The Netherlands

Number R51/2006-A-NL1-20.03 revision 1 Project number 4075276 Page 1 of 3

Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Applicant and Manufacturer

Mettler-Toledo GmbH Im Langacher 44 CH-8606 Greifensee Switzerland

Identification of the An Automatic catchweighing instrument certified type Type : TLW15X (X=0-9, for example TLW150, TLW155)

Characteristics

See next page

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

OIML R 51-1:2006 for accuracy class Y(a) or Y(b)

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 2 April 2026

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

Reproduction of the complete document only is permitted.

OIML Certificate

Number R51/2006-A-NL1-20.03 revision 1

Project number 4075276

Page 2 of 3

The conformity was established by the results of tests and examinations provided in the associated reports:

For the indicator model IND570:

  • No. NMi-13200606-01 dated 17 April 2014 that includes 53 pages;

  • No. NMi-13200606-02 dated 17 April 2014 that includes 17 pages;

  • No. NMi-13200606-03 dated 9 October 2015 that includes 9 pages;

  • No. NMi-13200606-04 dated 9 October 2015 that includes 13 pages.

  • For the load cell model MTB:

  • No NMi-R60/2000-NL-02.10A dated 9 April 2002 that includes 40 pages;

  • No NMi-R60/2000-NL-02.10B dated 5 April 2002 that includes 37 pages;

  • No NMi-R60/2000-NL1-05.18A dated 4 November 2004 that includes 38 pages;

  • No NMi-R60/2000-NL1-05.18B dated 4 November 2004 that includes 37 pages;

  • No NMi-R60/2000-NL1-05.18C dated 10 October 2005 that includes 40 pages;

  • No LSfc2015-6001 dated 24 June 2015 that includes 24 pages;

  • No LSfc2015-6002 dated 24 June 2015 that includes 22 pages.

  • For the automatic catchweighing instrument:

  • No. NMi-2424540-01 dated 17 September 2020 that includes 30 pages.

Characteristics of the automatic catchweighing instrument

Destined to be used asAutomatic catchweighing instrument
Accuracy classY(a)/Y(b)
Maximum capacity≤100kg
Minimum capacityMin≥20e for classY(a)Min≥10e for classY(b)Min≥5e for scales used for grading(postal scales)
Verification scale intervale≥10g
Weighing rangeSingle interval
Maximum number of scale intervalsn≤3000n≤1200
Maximum load transport system speed≤60m/min≤90m/min
Electromagnetic environment classE2
Climatic environmenttemperature range-10℃/+40℃
humiditynon-condensing
intended locationclosed
Power supply voltage100V-240VAC50/60Hz
Software identificationVersion numberSee certificateTC8458

$ ^{1)} $ (xx is a number between 00 and 99 representing major updates of the non legally relevant part of the software and yyyy is a number between 0000 and 9999 and represents minor updates of the non legally relevant part of the software)

OIML Certificate

OIML Member State The Netherlands

Number R51/2006-A-NL1-20.03 revision 1

Project number 4075276

Page 3 of 3

Software:

The identification number will be displayed after pressing the key sequence:

  • Information recall (magnifying glass);

  • System information (letter "i");

  • Down arrow.

Revision History

This revision replaces the previous version.

RevisionDateChange(s)
02020-09-17Initial issue.
12026-04-02Updated the minimum capacity.