Skip to content

← R51

R51/2006-A-NL1-21.03

Applicant
Minebea Intec Aachen GmbH & Co. KG
Issuer
NL1
Issuing year
2021
Status
Valid

Source PDF (certificates/R51/2006/r051-2006-nl1-2021-03.pdf) · extracted by OCR from the digitalized tier of the corpus.

R51/2006-A-NL1-21.03

OIML Certificate

OIML Member State The Netherlands

Number R51/2006-A-NL1-21.03 Project number 2213834 Page 1 of 2

Issuing authority

NMi Certin B.V.

Person responsible: M. Boudewijns

Applicant and Manufacturer

Minebea Intec Aachen GmbH & Co. KG Am Gut Wolf 11 52070 Aachen Germany

Identification of the certified type

An Automatic catchweighing instrument Type : Essentus Performance H

Characteristics

See next page

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

OIML R 51 - Edition 2006 (E) for accuracy class XIII(x) or Y(a)

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 26 March 2021

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

OIML Member State The Netherlands

Number R51/2006-A-NL1-21.03

Project number 2213834

The conformity was established by the results of tests and examinations provided in the associated OIML Type Evaluation Reports:

Page 2 of 2

  • No. NMi-2213834-01 dated 26 March 2021 that includes 17 pages;

  • No. NMi-2213834-02 dated 26 March 2021 that includes 39 pages;

No. NMi-2213834-03 dated 26 March 2021 that includes 18 pages.

Characteristics of the automatic catchweighing instrument

Destined to be used ascheckweigher, weight labeller
Accuracy classXIII(1) actual accuracy class determined at the time of putting into use Y(a)
Maximum capacity40kg≤Max≤150kg
Minimum capacityMin≥250e for class XIII Min≥20e for class Y(a)
Verification scale intervale≥10g
Weighing range(s)Single interval
Maximum number of scale intervalsn≤4000
Maximum load transport system speed72m/min.
Dynamic setting (adjustment range referred to setpoint)±20%
Electromagnetic environment classE2
Climatic environmenttemperature range+5℃/+40℃
humiditynon-condensing
intended locationclosed
Power supply voltage230V AC 50/60Hz
Software identificationVersion numberxx.yy.zz-E01 (y,x,z=0...99)