R51/2006-NL1-17.06 Rev. 1
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-17.06 revision 1 Project number 2658008 Page 1 of 3
Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Dibal S.A.
Manufacturer Astinze Kalea,26-Pol. Ind. Neinver
48160 Derio (Bilbao-Vizcaya)
Spain
Identification of the An Automatic catchweighing instrument certified type Type : LS-4xxx
LS-4xxx
CW-4xxx
GW-4xxx
WL-4xx,
Characteristics See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 51 - Edition 2006 (E) for accuracy class [XIII(1) or Y(a)]
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 13 August 2021
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-17.06 revision 1
Project number 2658008
The conformity was established by the results of tests and examinations provided in the associated OIML Test Report(s):
Page 2 of 3
No. R51/1996-NL1-0603A dated 9 November 2011 that includes 53 pages;
No. R51/1996-NL1-0603B dated 9 November 2011 that includes 20 pages;
No. NMi-10200991-01 dated 30 June 2011 that includes 36 pages;
No. NMi-10200991-02 dated 30 June 2011 that includes 16 pages.
Characteristics of the automatic catchweighing instrument
| Destined to be used as | checkweigher, weight grader, weight/price labeller |
| Accuracy class | XIII(1) or Y(a) |
| Maximum capacity | Max≤60kg |
| Minimum capacity | ≥20e for classY(a)≥50e for classXIII(1) |
| Verification scale interval | e≥1g |
| Maximum number of scale intervals | n≤3000 |
| Tare | T≤-(Max-e) |
| Maximum load transport system speed | Depending on weight, see table below |
| Maximum rate of operation | Depending on weight, see table below |
| Electromagnetic environment class | E2 |
| Temperature range | -10℃/+40℃ |
| Power supply voltage | 230V AC, 50/60Hz |
| Software identification | See below |
| Weight [scale divisions] | Belt speed [m/min] | Weighing speed [packages/min] |
| 0≤m≤1000e | 61,5 | 162 |
| 1000e≤m≤2000e | 36 | 95 |
| 2000e≤m≤3000e | 19 | 50 |
Software identification:
The software application will show the program version identification:
Weight (metrologically relevant software on the CPU): 1.02;
Display (2 possibilities):
Software of display CPU (keyboard and LCD display): 1.27;
Display Application in models with TFT display and Touch screen: 1.10 A.
The software version and identification number will be displayed from the initial screen. Press "MENU" to enter in the main menu, press the key "7" to enter in Test Mode, then press "2" to select Versions. The software of the versions of the different CPU's is shown.
OIML Certificate
OIML Member State The Netherlands
Number R51/2006-A-NL1-17.06 revision 1
Project number 2658008
Page 3 of 3
Revision History
| Revision | Date | Changes |
| 0 | 2017-12-27 | Initial issue |
| 1 | 2021-08-13 | Changed the type names |