R46/2012-A-NL1-21.19 Rev. 1
OIML Certificate
OIML Member State The Netherlands
Number R46/2012-A-NL1-21.19 revision 1
Project number 3570814
Page 1 of 3
Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Basic Electronics Company Limited,CR#2050129466 Manufacturer Al Hassan Al Basri Street,Al Khaldiah Al Janobiah District Dammam Kingdom of Saudi Arabia
Identification of the certified type
An Active electrical energy meter Type: BE3160WC
Characteristics See page 2
This OIML Certificate is issued under scheme A
This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 46-1/-2 (2012) "Active electrical energy meters"
Accuracy class
B
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 22 August 2023
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R46/2012-A-NL1-21.19 revision 1
Project number 3570814
Page 2 of 3
- No. NMi-2630085-02 dated 16 November 2021 that includes 17 pages.
The conformity was established by the results of tests and examinations provided in the associated report(s):
- No. NMi-2630085-04 dated 16 November 2021 that includes 9 pages.
Characteristics of the measuring instrument
In Table 1 the general characteristics of the measuring instrument are presented.
The construction of the measuring instrument is recorded in the Documentation folder no.3570814-2.
Table 1 General characteristics
| General characteristics | |
| Meter type | static |
| Connection mode(phase, wires, elements) | 3p,4w,3e |
| Direction of energy flow/ registers | bi-directional |
| Terminal arrangement | DIN |
| Protective class | 2 |
| Environmental application | |
| Ambient temperature range | -40℃ to +70℃-tested up to +75℃as a specific customer requirement. |
| Humidity class | H1 |
| IP Rating/environmental use | IP54/Indoor |
| Meter quantities | |
| Nominal voltage($U_{nom}$) | 3x133/230Vand3x230/400V |
| Nominal frequency($f_{nom}$) | 60Hz |
| Maximum current($I_{max}$) | 160A |
| Transitional current($I_{tr}$) | 2A |
| Minimum current($I_{min}$) | 0,5A |
| Starting current($I_{st}$) | 0,08A |
| Meter constant | 1000imp./kWh |
| Product version | |
| Hardware version | CT3T013_P1_V01.03(Main PCB),CT3T013_P2_V01.02(Power PCB) |
| Software identification | Version number:P0016 Checksum:F060CA10H |
OIML Certificate
OIML Member State The Netherlands
Number R46/2012-A-NL1-21.19 revision 1
Project number 3570814
Page 3 of 3
Certificate history:
| Revision | Date | Description of the modification |
| 0 | 18 November 2021 | Initially issue |
| 1 | 22 August 2023 | Changes in the LCD and resulting software changes has no effects on the previous type tests outcomes. |