Skip to content

← R46

R46/2012-A-NL1-21.19

Applicant
Basic Electronics Company Limited, CR#2050129466
Issuer
NL1
Issuing year
2021
Status
Valid

Source PDF (certificates/R46/2012/r046-2012-nl1-2021-19.pdf) · extracted by OCR from the digitalized tier of the corpus.

R46/2012-A-NL1-21.19

OIML Certificate

OIML Member State The Netherlands

Number R46/2012-A-NL1-21.19 Project number 2630085 Page 1 of 2

Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Applicant and Basic Electronics Company Limited,CR#2050129466 Manufacturer Al Hassan Al Basri Street,Al Khaldiah Al Janobiah District, Dammam, Kingdom of Saudi Arabia

Identification of the certified type

A measuring instrument Type: BE3160WC

Characteristics See page 2

This OIML Certificate is issued under scheme A

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 46-1/-2 (2012) "Active electrical energy meters"

Accuracy class

B

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 18 November 2021

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

Number R46/2012-A-NL1-21.19 Project number 2630085 Page 2 of 2

The conformity was established by the results of tests and examinations provided in the associated report(s):

  • No. NMi-2630085-01 dated 16 November 2021 that includes 54 pages;

  • No. NMi-2630085-02 dated 16 November 2021 that includes 17 pages.

Characteristics of the measuring instrument

In Table 1 the general characteristics of the measuring instrument are presented.

The construction of the measuring instrument is recorded in the Documentation folder no. 2630085-1.

Table 1 General characteristics

General characteristics
Meter typestatic
Connection mode(phase, wires, elements)3p,4w,3e
Direction of energy flow/ registersbi-directional
Terminal arrangementDIN
Protective class2
Environmental application
Ambient temperature range-40℃ to +70℃-tested up to +75℃as a specific customer requirement.
Humidity classH1
IP Rating/environmental useIP54/Indoor
Meter quantities
Nominal voltage($U_{nom}$)3x133/230Vand3x230/400V
Nominal frequency($f_{nom}$)60Hz
Maximum current($I_{max}$)160A
Transitional current($I_{tr}$)2A
Minimum current($I_{min}$)0,5A
Starting current($I_{st}$)0,08A
Meter constant1000imp./kWh
Product version
Hardware versionCT3T013_P1_V01.03(Main PCB),CT3T013_P2_V01.02(Power PCB)
Software identificationVersion number:P0015 Checksum:8ED2DC0D