R46/2012-A-NL1-20.06 Rev. 1
OIML Certificate
OIML Member State The Netherlands
Number R46/2012-A-NL1-20.06 revision 1 Project number 2509324 Page 1 of 3
Issuing authority Person responsible:
Applicant and Manufacturer
NMi Certin B.V.
M. Boudewijns
Holley Technology Ltd.
No.181 Wuchang Avenue
Yuhang District
Hangzhou
P.R. China
Identification of the certified type
A measuring instrument Type: DTSD545
Characteristics
See page 2 and further
This OIML Certificate is issued under scheme A
This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 46-1/-2 (2012) "Active electrical energy meters"
Accuracy class B
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 30 March 2021
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
Number R46/2012-A-NL1-20.06 revision 1
Project number 2509324
Page 2 of 3
- No. NMi-2509324-01a dated 30 March 2021 that includes 62 pages;
The conformity was established by the results of tests and examinations provided in the associated reports:
- No. NMi-2509324-02a dated 30 March 2021 that includes 13 pages.
Characteristics of the measuring instrument
In Table 1 the general characteristics of the measuring instrument are presented.
Table 1 General characteristics
| General characteristics | |
| Meter type | static |
| Connection mode(phase, wires, elements) | 3p,4w,3e |
| Direction of energy flow/ registers | bi-directional;Import Active energy(1.8.0)=|+A1|+|+A2|+|+A3|;Export Active energy(2.8.0)=|-A1|+|-A2|+|-A3|;Absolute active energy(15.8.0)=|+A1|+|+A2|+|+A3|+|-A1|+|-A2|+|-A3| |
| Terminal arrangement | BS |
| Protective class | Category 2 |
| Environmental application | |
| Ambient temperature range | -40℃ to +70℃(3k7):tested up to +75℃as a specific customer requirement |
| Humidity class | H2 |
| IP Rating/environmental use | IP54/indoor |
| Meter quantities | |
| Nominal voltage($U_{nom}$) | 3x133/230Vand3x230/400V |
| Nominal frequency($f_{nom}$) | 60Hz |
| Maximum current($I_{max}$) | 100A |
| Transitional current($I_{tr}$) | 1A($I_{b}=10$A) |
| Minimum current($I_{min}$) | 0,5A |
| Starting current($I_{st}$) | 0,04A |
| Meter constant | 1.000imp./kWh |
| Product version | |
| Hardware version | 17-X100-01VS1.1 |
OIML Certificate
OIML Member State The Netherlands
Number R46/2012-A-NL1-20.06 revision 1 Project number 2509324 Page 3 of 3
Page 3 of 3
| Software identification | Version number: HLY-1.0-20200224 Checksum: 32E6F041 |
Certificate history:
This revision replaces the previous version.
| Revision | Date | Description of the modification |
| Initial | 3 December 2020 | - |
| 1 | 30 March 2021 | Editorial changes & associated report references revised. |