Skip to content

← R21

R21/2007-A-NL1-23.03 Rev. 1

Applicant
Euphoria Software BV
Issuer
NL1
Issuing year
2024
Status
Valid

Source PDF (certificates/R21/2007/r21-2007-nl1-2023-03-rev1.pdf) · extracted by OCR from the digitalized tier of the corpus.

R21/2007-A-NL1-23.03 Rev. 1

OIML Certificate

OIML Member State The Netherlands

Number R21/2007-A-NL1-23.02 revision 1 Project number 3740708 Page 1 of 2

Page 1 of 2

Issuing authority

NMi Certin B.V.

Person responsible: M.Ph.D. Schmidt

Applicant and Manufacturer

Euphoria Software BV Wilhelminapark 36 5041 EC Tilburg The Netherlands

Identification of the certified type

Taximeter Manufacturers mark: Type:

cabman $ ^{\textcircled{R}} $MDT

Characteristics

See following page(s)

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 21 (2007) "Taximeters"

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 5 March 2024

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

OIML Member State The Netherlands

Number R21/2007-A-NL1-23.02 revision 1

Project number 3740708

Page 2 of 2

The conformity was established by the results of tests and examinations provided in the associated report(s):

  • No. NMi-2224566-01 dated 24 May 2019 that includes 42 pages;

  • No. NMi-2539358-01 dated 24 June 2022 that includes 24 pages;

  • No. NMi-3581614-02 dated 27 December 2022 that includes 10 pages;

  • No. NMi-3700106-02 dated 10 October 2023 that includes 14 pages;

  • No. NMi-3740708-01 dated 5 March 2024 that includes 17 pages.

Characteristics of the taximeter

Electromagnetic immunity classE3
Mechanical environment classM3
Climatic environmenttemperature range-20℃/+70℃
humiditycondensing
intended locationclosed
RangeResolution
Distance signal generator constant $k[\mathrm{km}^{-1}]$500 to 1000001
Time tariff [CU/h]0.00 to 3600.000.01
Distance tariff [CU/km]0.00 to 140.000.01
CU=Currency Unit
Time measuring signal frequency10Hz
Power supply voltage9-16VDC
Software identificationVersionCRC
1.2-219E6EEE965B28D1
1.2-221B5D537D5CEAC

The construction of the taximeter is documented in Documentation folder number T11593-4.

Certificate history

This revision replaces the previous version.

RevisionDateDescription of the modification
02023-12-22Initial issue
12024-03-05Addition of 5 inch display