Skip to content

← R139

R139/2018-A-NL1-23.01 Rev. 1

Applicant
Dover Fueling Solutions UK Limited
Issuer
NL1
Issuing year
2023
Status
Valid

Source PDF (certificates/R139/2018/r139-2018-nl1-2023-01-rev1.pdf) · extracted by OCR from the digitalized tier of the corpus.

R139/2018-A-NL1-23.01 Rev. 1

OIML Certificate

OIML Member State The Netherlands

Number R139/2018-A-NL1-23.01 revision 1

Project number 3650088

Page 1 of 2

Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Applicant and Manufacturer

Dover Fuel Solution UK LTD West Pitkerro Industrial Estate Unit 3 Baker Road Dundee DD5 3RT United Kingdom

Identification of the certified type

A calculating and indication device intended to be used as a part of a CG dispenser. Type: iGEM2

Characteristics See following page(s)

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 139:2018 "Compressed gaseous fuel measuring systems for vehicles"

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 21 June 2023

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

OIML Member State The Netherlands

Number R139/2018-A-NL1-23.01 revision 1

Project number 3650088

Page 2 of 2

The conformity was established by the results of tests and examinations provided in the associated report(s):

Characteristics of the measuring instrument

  • No. NMi-3643144-01 dated 7 April 2023 that includes 23 pages.

In Table 1 the general characteristics of the measuring instrument are presented. The construction of the measuring instrument is recorded in the Documentation folder no. 3643144-2.

Table 1 General characteristics

Accuracy class2 or 4 (Depending on measuring system accuracy class)
Environmental classesM1/E1
Ambient temperature range-40/+55℃; non-condensing humidity
Intended for the measurement ofHydrogen
Power supply voltage100-240V AC;50/60Hz attached to 24VDC power supply switch;Model:OMRONS8VK-G06024.(Input:100-240VAC50/60Hz1.3A,Output:24VDC2.5AClass2)
Software identificationBootloader - Version number:007.001.000. - Checksum:F92E4B0B. Dispenser application - Version number:2.001.001. - Checksum:39C5C83b.

Certificate history:

This revision replaces the previous version.

RevisionDateDescription of the modification
Initial7 April 2023-
121 June 2023Software revision WM090494_Rev_2_2.