Skip to content

← R137

R137/2012-A-NL1-20.10 Rev. 1

Applicant
MeteRsit
Issuer
NL1
Issuing year
2020
Status
Valid

Source PDF (certificates/R137/2012/r137-2012-nl1-2020-10-rev1.pdf) · extracted by OCR from the digitalized tier of the corpus.

R137/2012-A-NL1-20.10 Rev. 1

OIML Certificate

OIML Member State The Netherlands

Number R137/2012-A-NL1-20.10 revision 1 Project number 2364857 Page 1 of 5

Issuing authority

Manufacturer

NMi Certin B.V.

Person responsible: M. Boudewijns

MeteRSit Viale dell'Industria, 31 35129 Padova Italy

Identification of the certified type

An Electronic Gas Meter Type: x485xxx

Characteristics

See page 2 and further

This OIML Certificate is issued under scheme A

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 137-1 (2012) "Gas meters"

Accuracy class 1,5

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

This certificate and supporting reports comply with the requirements of OIML-CS-PD-07 clause 6.2.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 27 November 2020

Certification Board

NMi Certin B.V.

Thijsseweg 11

2629 JA Delft

The Netherlands

T +31 88 636 2332

certin@nmi.nl

www.nmi.nl

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

Reproduction of the complete document only is permitted.

The notification of NMi Certin B.V. as Issuing Authority can be verified at www.oiml.org

This document is digitally signed and sealed. The digital signature can be verified in the blue ribbon at the top of the electronic version of this certificate.

OIML Certificate

Number R137/2012-A-NL1-20.10 revision 1 Project number 2364857 Page 2 of 5

The conformity was established by the results of tests and examinations provided in the associated report(s):

  • No. NMi-16200852-01 dated 8 May 2017 that includes 13 pages;

  • No. NMi-16200387-02 dated 17 October 2016 that includes 61 pages.

  • No. NMi-1901029-02 dated 11 October 2017 that includes 14 pages;

  • No. NMi-1901403-02 dated 1 February 2018 that includes 21 pages;

  • No. NMi-1902208-02 dated 25 July 2018 that includes 14 pages;

  • No. NMi-2268368-02 dated 6 December 2018 that includes 10 pages;

  • No. NMi-2327085-02 dated 13 June 2019 that includes 3 pages;

  • No. NMi-1902287-02 dated 17 February 2020 that includes 18 pages;

  • No. NMi-2188742-02 dated 3 June 2020 that includes 16 pages;

  • No. NMi-2364857-02 dated 23 November 2020 that includes 26 pages.

Characteristics of the measuring instrument

In Table 1 the general characteristics of the measuring instrument are presented. Table 2 gives an overview of the general characteristics of the family of instruments.

Table 1 General characteristics

Destined for the measurement ofGas volume of natural gas, type H or L
Environmental classesM1/E2
Accuracy class1.5
Maximum pressure500 mbar
Ambient temperature range-25-+55℃
Gas temperature range-25-+55℃
Designed forCondensing humidity
OrientationHorizontal
Power supply voltageBattery powered

OIML Certificate

OIML Member State The Netherlands

Number R137/2012-A-NL1-20.10 revision 1

Project number 2364857

Page 3 of 5

Software identificationVersion numberChecksumMeter size
EL10ADB2G1.6
EL10ADB2G2.5
E13203EFG4MMU6
E167D029
G182A1A8
G19218FB
G19303B6
I1928F41
G1941CCF
GL015812
GL108096
EL10ADB2
GL201B98163C
GL101FA8
A132CA53G6
A1677199
J182BDC1
J1923484
J1934586
L192D8DD
J1945FFA
JL01B0DE
JL107EEA
B1666CA4G10MMU16
B18382D8
B192B8EF
B19422FA
BL01BD57
BL104175G16MMU25
F154E336
F1667D4C
C182C9BE
C192BC94
C194F780
CL0162F5
CL10B51FG25MMU40
CL11F7E8
H1546B95
H166F29E
D182E589
D192E889
D194416D
DL01CBFE
DL1038FA
DL113EF9

OIML Certificate

OIML Member State The Netherlands

Number R137/2012-A-NL1-20.10 revision 1

Project number 2364857

Page 4 of 5

Metrology processing softwareEL303CA2E7AFG1.6
GL30457E70ACG4
EL40A7345A73G1.6
GL408AAEF5EDG4
JL40A7BCEB12G6
JL30917875FBG6
BootloaderO430375B8BF8GPRS
U530CD16D523WMBUS
W530CD16D523Walk-By

Table 2 General characteristics of the family of instruments

Meter sizeG1.6G2.5G4MMU6G4ext.G6G10MMU16G16MMU25G25MMU40
Minimum flow rate $Q_{\mathrm{min}}$(m3/h)0,0160,0250,040,0160,060,10,160,25
Transitional flow rate $Q_{\mathrm{t}}$(m3/h)0,250,40,60,2511,62,54
Maximum flow rate $Q_{\mathrm{max}}$(m3/h)2,546610162540
Overload flow rate $Q_{\mathrm{r}}$(m3/h)34,87,27,21219,23048
Indicating range(m3)99999or99999999999
Verification scale interval(m3)0,0010,001
Nominal diameter[mm]325065

OIML Certificate

OIML Member State The Netherlands

Number R137/2012-A-NL1-20.10 revision 1

Project number 2364857

Page 5 of 5

Certificate history:

This revision replaces the previous version.

RevisionDateDescription of the modification
Initial18 June 2020-
0127 November 2020Addition of report No. NMi-2364857-02 and software update