R134/2006-A-NL1-24.01 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R134/2006-A-NL1-24.01 revision 0 Project number 2647140 Page 1 of 2
Issuing authority
NMi Certin B.V. Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
SMA Road Safety s.r.l. Via Giovanni Battista Pirelli 81025 Marcianise CE Italy
Identification of the certified type
An Automatic instrument for weighing road vehicles in motion Type : Load cell WIM system: single/double
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 134-1:2006 for accuracy class 5 and 10
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 16 July 2024
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
OIML Certificate
OIML Member State The Netherlands
Number R134/2006-A-NL1-24.01 revision 0 Project number 2647140 Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated report:
Page 2 of 2
No. NMi-2647140-01 dated 16 July 2024 that includes 31 pages.
Characteristics of the automatic instrument for weighing road vehicles in motion:
| Accuracy class | Vehicle mass | 5(double WIM) | 10(single WIM) |
| Maximum capacity(per load receptor) | 20t | ||
| Minimum capacity(per load receptor) | 1000kg | 2000kg | |
| Scale interval | d≥100kg | d≥200kg | |
| Maximum operating speed | vmax=60km/h | ||
| Minimum operating speed | vmin=5km/h | ||
| Application | Not to be used to weigh liquid products | ||
| Temperature range | -10℃/+40℃ | ||
| Power supply voltage | 100-240V AC 50/60Hz | ||
| Software identification | Version number | V1.0.x(x=0...9and represents patch number) | |
Revision History
| Revision | Date | Change(s) |
| 0 | 2024-07-16 | Initial issue. |