R134/2006-GB1-2012.02

OIML Certificate Nº

R134/2006-GB1-12.02

OIML CERTIFICATE OF CONFORMITY

Issuing authority: National Measurement Office

Person responsible: Paul Dixon - Product Certification Manager

Applicant:

Dini Argeo S.r.l.

Via della Fisica 20

41042 Spezzano di Fiorano

Modena

Italy

Manufacturer: The applicant

Identification of the certified pattern: 3590E-AF09

This certificate attests the conformity of the above-mentioned pattern (represented by the samples identified in the associated test report) with the requirements of the following Recommendation of the International Organisation of Legal Metrology (OIML):

OIML R 134 - Edition 2006(E) for accuracy class: $ \geq2 $

This certificate relates only to the metrological and technical characteristics of the pattern of the instrument concerned, as covered by the relevant OIML International Recommendation.

This certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the certificates reference number and the name of the OIML Member State in which the certificate was issued, partial quotation of the certificate or of the associated test report is not permitted, though they may be reproduced in full.

Issue Date: 21 September2012 ReferenceNo: T1138/0015

Signatory: PR Dixon

National Measurement Office | Stanton Avenue | Teddington | TW11 0JZ | United Kingdom Tel +44 (0)20 8943 7272 | Fax +44 (0)20 8943 7270 | Web www.bis.gov.uk/nmo

BIS

Department for Business Innovation & Skills

The conformity was established by tests and examination described in the associated pattern evaluation report P00251/R76 which includes 12 pages.

Characteristics of the instrument:

The 3590E-AF09 instrument is used for dynamic axle weighing of road vehicles in motion and can be configured by using one or two WWS platforms fixed temporarily to a concrete base or it can be configured to use the RWS fixed platforms embedded into the ground. The weighing system shall be installed to manufacturing guidelines in a controlled weighing area where vehicle speed is controlled, and shall adhere to the installation requirements of OIML R134 1:2006 (E) or any later versions. The weighing system shall not be mounted in or on a normal road surface.

Indicator types:

This instrument utilises the following digital indicating devices designated the 3590-E, CPWE, DFW and DFWK06.

The above named indicators have the following features:

• ABS plastic, stainless steel or aluminium enclosures

• LCD or LED display

• Functions keys

• Connections and ports located at the back

Technical characteristics for the indicators:

Interfaces:

The instrument may have the following interface type:

• 4 or 6-wire load cell connection

DC voltage input

RS-232

RS-485

• Control inputs/outputs

USB

Ethernet

Bluetooth

• RF (radio frequency)

WiFi

Seals:

The calibration and setup parameters can only be accessed via the sealed switch located on the main board.

Load cell:

Any compatible load cell(s) may be used providing the following conditions are met:

There is a respective OIML Certificate of Conformity (R60) issued for the load cell.

• The certificate contains the load cell types and the necessary load cell data required for the manufacturer's declaration of compatibility of modules, and any particular installation requirements. A load cell marked NH is allowed only if humidity testing to R76 has been conducted on this load cell.

• The compatibility of the load cells and indicator is established by the manufacturer by means of the compatibility of modules calculation at the time of verification.

• The load cell transmission conforms to a standard type.