R134/2006-A-DK2-23.01

OIML Member State Denmark

OIML Certificate of Conformity No. R134/2006-A-DK2-2023.01

OIML CERTIFICATE ISSUED UNDER SCHEME A

OIML Issuing Authority
Name:	FORCE Certification A/S
Address:	Park Allé 345, 2605 Brøndby, Denmark
Person responsible:	Per Rafn Crety
Applicant
Name:	Esit Elektronik A.Ş.
Address:	Nişantepe Mah. Gelin Çiçeği Sk-No:3634794 Çekmeköy-IstanbulTurkey
Manufacturer	Esit Elektronik A.Ş.
Identification of the certified type(the detailed characteristics will be defined in the additional pages)AR-WIM
Designation of the module(if applicable)Automatic instrument for weighing road vehicles in motion
This OIML Certificate attests the conformity of the above identified type(represented by the sample(s) identified in the OIML type evaluation report)with the requirements of the followingRecommendation of the International Organization of Legal Metrology(OIML):OIML R134-1,Edition(year):2006For accuracy class:0.5 or higher,and B or higher

Revision No.	Date	Description of the modification
Initial version	14 April 2023	-



Identification, signature and stamp The OIML Issuing Authority FORCE Certification A/S
Date:14 April2023Jens Hovgård Jensen2023-04-14 Digitally signed by Jens Hovgård Jensenjhje@force.dkCertification Manager
Important note: Apart from the mention of the Certificate's reference number and the name of theOIML Member State in which the Certificate is issued, partial quotation of theCertificate and of the associated OIML type evaluation report(s) is not permittedalthough either may be reproduced in full.

Descriptive annex

Characteristics

Accuracy class for vehicle mass		0.5	1	2	5	10
Accuracy class for single axle load		B or C	B or C or D	C or D	D or E	F
Maximum capacity	Max	≤3000kg
Minimum capacity	Min	≥50×d		≥10×d
Scale interval	d	10kg	10kg≤d≤20kg	10kg≤d≤50kg	10kg≤d≤100kg	10kg≤d≤200kg
Number of scale intervals	n	≤3000		≤1000
Maximum operation speed	Vmax	8km/h				10km/h
Minimum operation speed	Vmin	1km/h
Maximum transit speed		30km/h
Maximum number of axles		≤15
Direction of travel		dual
Scale interval for stationary load	e	≥1.25μV
Power supply voltage		12-24VDC
Connected load cells		Shall comply withR60
Temperature range for the indicator		-10℃/+40℃
Software version for LCA indicator		1.xy

Sealing

Access to the configuration and calibration facilities of the LCA indicator is achieved by removing an internal calibration jumper, which is located on the Scale Input Card. Access is prohibited when the jumper is applied.

Sealing of the access to the jumper is accomplished by either sealing the enclosure with either wire and seal through holes in the fixing screws of the enclosure or by means of tamper evident stickers.

The cable between the load receptor and the indicator shall be sealed with wire and seal or with tamper evident sticker(s)

Interfaces

RS232

The interface does not have to be secured.

Load receptor AR-WIM and apron.