R134/2006-A-DK2-22.02
OIML Member State Denmark
OIML Certificate of Conformity No. R134/2006-A-DK2-2022.02
OIML CERTIFICATE ISSUED UNDER SCHEME A
| OIML Issuing Authority | |
| Name: | FORCE Certification A/S |
| Address: | Park Allé 345, 2605 Brøndby, Denmark |
| Person responsible: | Per Rafn Crety |
| Applicant | |
| Name: | Giropes |
| Address: | Pol. Empordà Internacional C/F parcela 15,1617469 VILAMALLA (Girona)Spain |
| Manufacturer | Giropes |
| Identification of the certified type (the detailed characteristics will be defined in the additional pages) BPRxx-GI6xx-Gesdyn | |
| Designation of the module (if applicable) Automatic instrument for weighing road vehicles in motion | |
| This OIML Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML type evaluation report) with the requirements of the following Recommendation of the International Organization of Legal Metrology(OIML): OIML R 134-1,Edition(year):2006 For accuracy class:10 and F | |
| Revision No. | Date | Description of the modification |
| Initial version | 07 December 2022 | - |
| Identification, signature and stamp The OIML Issuing Authority FORCE Certification A/S | ||
| Date: 07 December 2022 Jens Hovgård Jensen 2022-12-07 Digitally signed by Jens Hovgård Jensen jhje@force.dk Certification Manager | ||
| Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full. | ||
Descriptive annex
Characteristics
| Accuracy class for total weight: | 10 |
| Accuracy class for single axle load: | F |
| Accuracy class for axle group load: | Not supported |
| Maximum capacity(Max): | 15000kg |
| Minimum capacity(Min): | ≥500kg |
| Scale interval(d): | 50kg |
| Direction of travel: | Both |
| Maximum operation speed(vmax): | 5km/h |
| Minimum operation speed(vmin) | 1km/h |
| Maximum transit speed: | 10km/h |
| Maximum number of axles: | ≤15 |
| Extra warm-up time | none |
| Power supply voltage: | 110-240VAC |
| Temperature range: | -10℃to+40℃ |
Software
The software versions of GI6xx are:
Boot loader software: 1.0.4
Weighing software: 2.0.0
The software version of Gesdyn is: 3.2.x.y, where x and y represent non-legal error corrections.
Sealing and securing
Configuration and calibration are stored inside GI6xx and protected by a jumper on the mainboard Access to this jumper can be sealed in two different ways.
Method A: The jumper is covered by a plastic shield and access is protected by a tamper proof sticker
Method B: Access to the inside of the enclosure is sealed by two tamper proof stickers on opposite sides of the enclosure or one tamper proof sticker covering a screw for the enclosure or by wire and seal
Devices
Initial zero-setting (20% of Max)
Semi-automatic zero-setting (4% of Max) - non-automatic mode only.
Automatic zero-setting (4% of Max)
Zero tracking (4% of Max)
Interfaces
Depend on configuration of the PC. The interfaces do not have to be secured.