R134/2006-A-DK2-21.01
OIML Member State Denmark
OIML Certificate of Conformity No. R134/2006-A-DK2-2021.01
| OIML CERTIFICATE ISSUED UNDER SCHEME A | |
| OIML Issuing Authority | |
| Name: | FORCE Certification A/S |
| Address: | Park Allé 345, 2605 Brøndby, Denmark |
| Person responsible: | Per Rafn Crety |
| Applicant | |
| Name: | Giropes |
| Address: | Pol. Empordà Internacional C/F parcela 15,1617469 VILAMALLA (Girona)Spain |
| Manufacturer | Giropes |
| Identification of the certified type (the detailed characteristics will be defined in the additional pages)BPPEM-B615 | |
| Designation of the module(if applicable)Automatic instrument for weighing road vehicles in motion | |
| This OIML Certificate attests the conformity of the above identified type(represented by the sample(s) identified in the OIML type evaluation report)with the requirements of the followingRecommendation of the International Organization of Legal Metrology(OIML):OIML R134-1,Edition(year):2006For accuracy class:0.5 and B | |
OIML Certificate No.
R134/2006-A-DK2-2021.01
This OIML Certificate relates only to metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML Recommendation identified above.
This OIML Certificate does not bestow any form of legal international approval.
The conformity was established by the results of tests and examinations provided in the associated OIML reports:
Type examination report: No. 120-24433.10 dated 24 February 2021, that includes 66 pages
Type examination report: No. 121-26819.10 dated 21 September 2021, that includes 23 pages
Type evaluation report: No. 121-26819.90.20 dated 21 September 2021, that includes 12 pages
The technical documentation relating to the identified type is contained in documentation file:
121-26819
OIML Certificate History
Revision No. Date Description of the modification
Initial version 26 October 2021 -
Identification, signature and stamp
The OIML Issuing Authority
FORCE Certification A/S
Date: 26 October 2021
Jens Hovgård Jensen
2021-10-26
Digitally signed by Jens Hovgård Jensen
Certification Manager
Important note: Apart from the mention of the Certificate’s reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and of the associated OIML type evaluation report(s) is not permitted, although either may be reproduced in full.
Descriptive annex
Characteristics
| Accuracy class for total weight: | 0.5 or higher |
| Accuracy class for single axle load: | B or higher |
| Accuracy class for axle group load: | Not supported |
| Maximum capacity(Max): | 15000kg40000kg |
| Minimum capacity(Min): | according to OIML R134-1:2006 sect.2.4 |
| Scale interval(d): | 20kgor50kg |
| Direction of travel: | Both |
| Maximum operation speed(vmax): | 10km/h |
| Minimum operation speed(vmin) | 2km/h |
| Maximum transit speed: | 30km/h |
| Maximum number of axles: | 15 |
| Extra warm-up time | none |
| Power supply voltage: | 110-240VAC |
| Temperature range: | -10℃to+40℃ |
Software
The indicator has software separation in a legal part and an application part. The tested indicator has software versions:
Legal software:
WIM: V.2.0.0 CRC: 3BDE8A5E
CPU boot:
Non legal software:
Application:
Sealing and securing
Configuration and calibration are protected by software means. The instrument contains an event counter and a calibration counter that is updated when parameters are changed, or a calibration is performed.
The value of the counters are shown at power up.
The electronic of B615 shall be secured against exchange by physical seal(s).
The load cell connector shall be sealed with wire and seal or a tamper-free sticker.
Interfaces
RS232
RS485
Ethernet
CAN bus
USB
The interfaces do not have to be secured.
Apron specification for BPPEM
GEOMETRY OF WEIGHING AREA
ATTENTION:
The weighing area must be leveled respect to the scale. Maximum difference 2 mm only.
The bearing path must be in level 0 respect to the scale.
Such path can be obtainen through self-levelling concrete or metal plates.
TRANSVERSAL GRADIENT