R134/2006-CH1-2015.01
Member State Switzerland
OIML Certificate No R134/2006-CH1-15.01
OIML CERTIFICATE OF CONFORMITY
Issuing authority
Name
Federal Institute of Metrology METAS
Conformity Evaluation Body METAS-Cert
Address
Lindenweg 50, 3003 Bern-Wabern, Switzerland
Person responsible
Gulian Couvreur, Head of METAS-Cert
Applicant
Name
Kistler Instrumente AG
Address
Eulachstrasse 22,8408 Winterthur, Switzerland
Manufacturer
The manufacturer of the certified pattern is the Applicant
Identification of the certified pattern
Automatic instruments for weighing road vehicles in motion and measuring axle loads
Type
WIM System 9835A
This Certificate attests the conformity of the above identified type (represented by the sample or samples identified in the associated test report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 134-1, edition 2006
for accuracy class(es) 5,10,F
This Certificate relates only to the metrological and technical characteristics of the type of instrument covered by the relevant OIML Recommendation identified above.
This Certificate does not bestow any form of legal international approval.
Metrological characteristics
| Accuracy class for vehicle mass | 5 | 10 |
| Accuracy class for Axle load | F | |
| Scale interval,d | 50kg | |
| Maximum capacity,Max | 15'000kg | |
| Maximum capacity totalized | 50'000kg | |
| Minimum capacity,Min | 2'000kg | 250kg |
| Minimum capacity totalized | 8'000kg | 500kg |
| Maximum operating speed,vmax | 35km/h | 65km/h |
| Number of sensor rows | 4 | 2,3,4 |
| Minimum operating speed,vmin | 3km/h | |
| Temperature range | -20to65℃ | |
The conformity was established by the results of tests and examinations provided in the associated Test Reports:
No / Including pages
133-07132/89
133-07133/30
CH-3003 Bern-Wabern, 11 February 2015
The Issuing Authority
Federal Institute of Metrology METAS
The CIML Member
Dr. Philippe Richard, Deputy Director
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate is issued, partial quotation of the Certificate and the associated Test Report is not permitted, although either may be reproduced in full.