R129/2020-A-NL1-25.01 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R129/2020-A-NL1-25.01 revision 0 Project number 3467598 Page 1 of 3
Issuing authority
NMi Certin B.V.
Person responsible: M.Ph.D. Schmidt
Applicant and Manufacturer
Teraoka Seiko Co., Ltd.
13-12 Kugahara, 5-Chome
Ohta-Ku, Tokyo 146-8580
Japan
Identification of the certified type
A Multi-Dimensional Measuring instrument Type : SQ-2xxx, SQ-2xxxM, SQ-3xxx, SQ-3xxxM
Characteristics
See next page
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified Type (represented by the sample(s) identified in the OIML Test Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
OIML R 129:2020
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation above-identified. This Certificate does not bestow any form of legal international approval.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Test Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 10 March 2025
Certification Board
NMi Certin B.V.
Thijsseweg 11
2629 JA Delft
The Netherlands
T +31 88 6362332
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
The notification of NMi Certin B.V. as Issuing Authority can be verified at www.oiml.org
OIML Certificate
OIML Member State The Netherlands
Number R129/2020-A-NL1-25.01 revision 0
Project number 3467598
Page 2 of 3
The conformity was established by the results of tests and examinations provided in the associated OIML Type Evaluation Reports:
No. NMi-1900993-04 dated 30 May 2018 that includes 72 pages;
No. NMi-1900993-05 dated 30 May 2018 that includes 20 pages;
- No. NMi-2618525-01 dated 11 October 2021 that includes 27 pages.
Characteristics of the multi-dimensional measuring instrument
| Principle of operation | Cutting a light beam | |||
| Maximum dimension | L(Length) | W(Width) | H(Height) | |
| type SQ-2xxx(M) | max≤1530mm | max≤600mm | max≤920mm | |
| type SQ-3xxx(M) | max≤900mm | |||
| Minimum dimension | min≥150mm | min≥100mm | min≥20mm | |
| Measuring range and scale interval | Single interval | d≥5mm | ||
| Multi-interval | d≥5mm | d≥2mm(H≤30mm)d≥5mm(H>30mm) | ||
| Speed range | 30m/min≤v≤100m/min | |||
| Electromagnetic environment class | E2 | |||
| Mechanical environment class | M1 | |||
| Climatic environment | temperature range | 0℃/+40℃ | ||
| humidity | non-condensing | |||
| intended location | closed | |||
| Power supply voltage | 3x200VAC50/60Hz | |||
| Method of operation | Automatic | |||
| Limitations of use | Rectangular, triangle and trapezium opaque objects with regular surfaces.The object needs to be rectangular on the base plane of the instrument. | |||
| Minimum spacing between successive objects | spacing≥40cm | |||
OIML Certificate
OIML Member State The Netherlands
Number R129/2020-A-NL1-25.01 revision 0
Project number 3467598
Page 3 of 3
| Software identification | ||
| Part | Software part | Firmware version(x=0...9) |
| Display unit | SQMesSrv.exe | 1.x.x.x or 2.x.x.x |
| SPK_Mmlf.dll | 1.x.x.x or 2.x.x.x | |
| Conveyor | SH | 1.xx |
| N10 | 1.xx | |
The identification number will be displayed in the version menu that is accessible via entering the 'Maintenance Mode' at operation and accordingly touch the "Maintenance" button and accordingly touch the 'System' button. The version menu with the software versions can be entered by touching the 'Version' button.
Revision History
| Revision | Date | Change(s) |
| 0 | 10 March 2025 | Initial issue. |