R117/2019-A-NL1-25.05 Rev. 0
OIML Certificate
OIML Member State The Netherlands
Number R 117/2019-A-NL1-25.05 revision 0 Project number 3885366 Page 1 of 2
Issuing authority Person responsible
NMi Certin B.V. M.Ph.D. Schmidt
Applicant and Manufacturer
Gilbarco GmbH
Ferdinand-Henze Straße 9
33154 Salzkotten
Germany
Identification of the certified type
A gas separator, intended to be used as a part of a fuel dispenser Type: GPU 140
Characteristics
See following page(s)
This OIML Certificate is issued under scheme A.
This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):
R 117-1:2019 "Dynamic measuring systems for liquids other than water"
Accuracy class
- 5
This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.
This certificate and supporting reports comply with the requirements of OIML-CS-PD-07 clause 6.2.
Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.
Issuing Authority
NMi Certin B.V., OIML Issuing Authority NL1 29 April 2025
Certification Board
This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.
This document is digitally signed and sealed. The digital signature can be verified in the blue ribbon at the top of the electronic version of this certificate.
OIML Certificate
Number R 117/2019-A-NL1-25.05 revision 0 Project number 3885366 Page 2 of 2
The conformity was established by the results of tests and examinations provided in the associated report(s):
CPC-705958, dated 18 October 2007 that includes 20 pages.
NMi-3885366-01, dated 29 April 2025 that includes 24 pages.
Characteristics of the gas separator
In Table 1 the general characteristics of the gas separator are presented.
The construction of the gas separator is recorded in the Documentation folder number TC7274-2.
Table 1 General characteristics of the gas elimination device
| Producer | Gilbarco GmbH |
| Type | GPU 140 |
| Maximum flow rate | 140 L/min |
| Minimum pressure | 0.4 bar(g) |
| Maximum pressure | 3.5 bar(g) |
| Environmental classes | M2 |
| Ambient temperature range | -40℃/+55℃ |
| Product temperature range | -40℃/+50℃ |
| Intended for the measurement of | low-viscosity mineral oils with a viscosity of 1.1 mPa·s-8.0 mPa·s. |
Production locations
The measuring instrument is produced at one of the following production locations:
Gilbarco GmbH, Ferdinand-Henze Straße 9, 33154 Salzkotten, Germany
Gilbarco Inc., 7300 W. Friendly Ave., Greensboro NC 27420, United States of America.
Gilbarco Veeder-Root India Pvt Ltd, Coimbatore Ind. Estate - Coimbatore, 641 021 Tamil Nadu India.
Certificate history:
| Revision | Date | Description of the modification |
| 0 | 29 April 2025 | Initial issue |