Skip to content

← R117

R117/2019-A-NL1-23.02 Rev. 1

Applicant
Oil & Gas Measurement LImited
Issuer
NL1
Issuing year
2024
Status
Valid

Source PDF (certificates/R117/2019/r117-2019-nl1-2023-02-rev1.pdf) · extracted by OCR from the digitalized tier of the corpus.

R117/2019-A-NL1-23.02 Rev. 1

OIML Certificate

OIML Member State The Netherlands

Number R 117/2019-A-NL1-23.02 revision 1

Project number 3739563

Page 1 of 5

Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Applicant and Oil & Gas Measurement Limited Manufacturer Denmark House, St. Thomas Place ELY, Cambridgeshire, CB7 4EX United Kingdom

An ultrasonic measurement transducer intended to be used as a part of a non-interruptible dynamic measuring system.

Brand: Metering & Technology SAS

Type: DFX-MM

DFX-LV

Characteristics See following page(s)

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 117-1:2019 "Dynamic measuring systems for liquids other than water"

Accuracy class 0,3;1,0

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 5 July 2024

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

Number R 117/2019-A-NL1-23.02 revision 1 Project number 3739563 Page 2 of 5

The conformity was established by the results of tests and examinations provided in the associated reports:

  • No. NMi-16200659-01 dated 23 February 2016 that includes 6 pages;

  • No. NMi-16200659-02 dated 23 February 2016 that includes 13 pages;

  • No. NMi-3595548-01 dated 11 April 2023 that includes 44 pages;

  • No. NMi-3739563-01 dated 05 July 2024 that includes 43 pages.

Characteristics of the measuring instrument

In Table 1 the general characteristics of the DFX series common to both DFX-MM and DFX-LV are presented.

In table 2 and table 3 the characteristics of DFX-MM are presented.

In table 4 and table 5 the characteristics of DFX-LV are presented.

The construction of the DFX series measuring instrument is recorded in the Documentation folder no. 16200659-2.

Table 1 General characteristics of DFX series

Manufacturer's trademarkOil & Gas Measurement Limited
Accuracy class0,3 or 1,0; See table 2 and 4 for type DFX-MM and type DFX-LV
Measurement principleUltrasonic
Path angleVarious
Sound frequency1 MHz-2 MHz
Environment ClassesM1/E2/H3
Ambient temperature range-25℃...+55℃
Straight pipe length requirementsUpstream 10D(+flow straightener)Downstream 5D
Electrical power230VAC/50Hz;24VDC;Earth connection of the internal power supply not to be connected.
Identification of softwareVersion:15.1110/Checksum:0x6C428B12
Version:20.0514/Checksum:0x2D298303

OIML Certificate

OIML Member State The Netherlands

Number R 117/2019-A-NL1-23.02 revision 1 Project number 3739563 Page 3 of 5

Table 2 Characteristics of type DFX-MM

Number of sound paths32(total 16 transducers)
Liquid temperature range-5℃...+35℃;(accuracy class0,3)-25℃...+55℃(accuracy class1,0)
Density range725...1050kg/m3
Maximum viscosity1398mPa·s
Minimum Reynolds number1.000
Maximum pressure105bar(g)

Table 3 Characteristics of the DFX-MM family of instruments

TypeSizeMinimum flow rate[m3/h]Maximum flow rate[m3/h]MMQ[m3]Remarks
DFX-MM044"(100mm)154000,5
DFX-MM066"(150mm)308002
DFX-MM088"(200mm)6015002
DFX-MM1010"(250mm)9025005
DFX-MM1212"(300mm)13032005
DFX-MM1414"(350mm)160380010
DFX-MM1616"(400mm)200500010
DFX-MM1818"(450mm)310500020
DFX-MM2020"(500mm)390500020

OIML Certificate

OIML Member State The Netherlands

Number R 117/2019-A-NL1-23.02 revision 1 Project number 3739563 Page 4 of 5

Table 4 Characteristics of type DFX-LV

Number of sound paths15(total 10 transducers)
Liquid temperature range-5℃...+35℃(accuracy class0,3)
Density range630...950kg/m3
Maximum viscosity19,8mPa·s
Minimum Reynolds number10.000
Maximum pressure10bar(g)

Table 5 Characteristics of the DFX-LV family of instruments

TypeSizeMinimum flow rate[m3/h]Maximum flow rate[m3/h]MMQ[m3]Remarks
DFX-LV044"(100mm)153220,5
DFX-LV066"(150mm)656442
DFX-LV088"(200mm)1206442
DFX-LV1010"(250mm)2006445Requires an automatic checking device to detect and generate an alarm when the flow rate is outside the restricted flow range
DFX-LV1212"(300mm)25030005
DFX-LV1414"(350mm)320320010
DFX-LV1616"(400mm)400400010
DFX-LV1818"(450mm)520520010

Note : Before taken into use the DFX-LV meter shall be calibrated on the product it is going to measure or on a product with similar properties (density and viscosity) at operating temperature and pressure (if possible).

This calibration should cover the entire Reynolds range (taking into account the operating ranges e.g. flow rate and viscosity) of the measuring system in which the measurement device is used.

OIML Certificate

OIML Member State The Netherlands

Number R 117/2019-A-NL1-23.02 revision 1

Project number 3739563

Page 5 of 5

Certificate history:

This revision replaces the previous version

RevisionDateDescription of the modification
011 April 2023First release
15 July 2024Addition of the meter type DFX-MM. Extension of the meter specification for type DFX-LV.