Skip to content

← R117

R117/2019-A-NL1-23.02 Rev. 0

Applicant
Oil & Gas Measurement LImited
Issuer
NL1
Issuing year
2023
Status
Valid

Source PDF (certificates/R117/2019/r117-2019-nl1-2023-02-rev0.pdf) · extracted by OCR from the digitalized tier of the corpus.

R117/2019-A-NL1-23.02 Rev. 0

OIML Certificate

OIML Member State The Netherlands

Number R 117/2019-A-NL1-23.02 revision 0 Project number 3595548 Page 1 of 3

Issuing authority NMi Certin B.V. Person responsible: M.Ph.D. Schmidt

Applicant and Manufacturer Oil & Gas Measurement Limited Denmark House, St. Thomas Place ELY, Cambridgeshire, CB7 4EX United Kingdom

Identification of the certified type

identification of the certified type An ultrasonic measurement device intended to be used as a part of a measuring system Type: DFX-LV

Characteristics See following page(s)

This OIML Certificate is issued under scheme A.

This Certificate attests the conformity of the above identified type (represented by the sample(s) identified in the OIML Type Evaluation Report) with the requirements of the following Recommendation of the International Organization of Legal Metrology (OIML):

R 117-1:2019 "Dynamic measuring systems for liquids other than water"

Accuracy class 0,3

This Certificate relates only to the metrological and technical characteristics of the type of measuring instrument covered by the relevant OIML International Recommendation identified above. This Certificate does not bestow any form of legal international approval.

Important note: Apart from the mention of the Certificate's reference number and the name of the OIML Member State in which the Certificate was issued, partial quotation of the Certificate and of the associated OIML Type Evaluation Report(s) is not permitted, although either may be reproduced in full.

Issuing Authority

NMi Certin B.V., OIML Issuing Authority NL1 11 April 2023

Certification Board

This document is issued under the provision that no liability is accepted and that the applicant shall indemnify third-party liability.

OIML Certificate

Number R 117/2019-A-NL1-23.02 revision 0 Project number 3595548 Page 2 of 3

The conformity was established by the results of tests and examinations provided in the associated reports:

  • No. NMi-16200659-01 dated 23 February 2016 that includes 6 pages;

  • No. NMi-16200659-02 dated 23 February 2016 that includes 13 pages.

  • No. NMi-3595548-01 dated 11 April 2023 that includes 44 pages.

Characteristics of the measuring instrument

In Table 1 the general characteristics of the measuring instrument are presented. In Table 2 the characteristics of the family of instruments are presented.

The construction of the measuring instrument is recorded in the Documentation folder no. 16200659-1.

Table 1 General characteristics

Manufacturer's trademarkOil & Gas Measurement Limited
Type designationDFX-LV
Accuracy class0,3
Measurement principleUltrasonic
Number of sound paths15(total 10 transducers)
Path angleVarious
Sound frequency1 MHz-2 MHz
Environment ClassesM1/E2/H3
Ambient temperature range-40℃...+70℃
Liquid temperature range-5℃...+35℃
Density range630...950kg/m3
Maximum viscosity5,2mPa·s
Minimum Reynolds number10.000
Straight pipe length requirementsUpstream10D+flow straightenerDownstream5D
Maximum pressure10bar(g)
Electrical power230VAC/50Hz;24VDC;Earth connection of the internal power supply not to be connected.
Identification of softwareVersion:15.1110Checksum:0x6C428B12

OIML Certificate

OIML Member State The Netherlands

Number R 117/2019-A-NL1-23.02 revision 0

Project number 3595548

Page 3 of 3

Table 2 Characteristics of the family of instruments

TypeSizeMinimum flow rate[m3/h]Maximum flow rate[m3/h]MMQ[m3]Remarks
DFX-LV044"(100mm)153000,5
DFX-LV066"(150mm)656002
DFX-LV088"(200mm)1206002
DFX-LV1010"(250mm)2006005Requires an automatic checking device to detect and generate an alarm when the flow rate is outside the restricted flow range
DFX-LV1212"(300mm)25030005
DFX-LV1414"(350mm)320320010
DFX-LV1616"(400mm)400400010
DFX-LV1818"(450mm)520520010

Certificate history:

RevisionDateDescription of the modification
Initial11 April 2023First release